Search results

I need some help sourcing the manuals for our hyd mule. It kinda works to build enough pressure to cycle our flight controls and does extract the hyd fluid in the system, but will not service the system back up. Maybe its not made to service, but without manuals, i dont know for sure. Pics...

This is the air compressor coolant lines. I know it doesn't look like what is actually on the truck, but this is what the manual is calling out. Item #2\ edit: for some reason its not letting me upload an image. TM 9-2320-260-24P1 WP 0088 00 But like has already been mentioned, get someone...

That may be what he does. The lift motor is turning max spd but with a slow enough rpm out of the rgb, and enough practice,is able to dial in on his next cut accurately.

If that is the case, then i need a 10 vfd since im starting off with a 10hp motor and was going to upgrade to a 20hp in the future if the need of more hp was required. The guy i bought my mill plans off of only uses 1 vfd for both his 10hp and 3/4hp motor. I have no idea how he controls each...

That is a piss poor shame its cheaper to fly people in than hiring locals. My coworker is an aviation electrician/avionics tech but he know his chit on the avn elec side. Our acft has 3 220v ac 3 phase 400hz generators and a transformer rectifier for 24v dc. Minus the hz, its very close to the...

I use progressive with a commercial policy. I talked to state farm for insuring my farm tractor, in addition to a policy for my autos and home. They were half ($440) of what kubota was asking for a yearly policy. I asked the agent about my 936A2, and he had to phone friend in a dallas office...

@kendelrio i agree, a limit switch tied into the parking brake and something linked/connected to the shifter stick, maybe an adjustable roller arm limit switch. But hey, id like to see an auto start for the 939 series and instal just for S&G.

Im betting the search engine on any auto parts places, amazon or even google could give you part numbers and pics of master disconnect switches. Like mentioned already, wire in at the batt box. There are even lockable and removable key type. I got mine off amazon.

From that info @Guyfang i think i’ll build me a gen set with my mechanical 4bt turbo cummins and buy a new gen head that already has the recommended voltage regulator @87cr250r mentioned, built in to the new stamford head. If i can get an electrician to come out and take my money (hard to...

I don't know the difference between them. you have any input?

Oh yea, the power company will bring it out, for a 6’ tall solid gold monkey. Seriously though, no, not for 1 customer, even though there is 3 phase 4 miles to my west and high tension/voltage and sub station to my south. Bringing me 3ph also ties my hands to where i have to set my mill up...

gotcha. replying to one post can get intermingled all to easy. but i am NOT eliminating any VFDs, and I'm guessing he was replying to your post of eliminating the VFDs and direct wiring the motors, which I will not or can not do. from my initial post, i stated using VFDs with a 3 phase generator...

@87cr250r So the DOL is null since my plans are to use 3ph and VFDs, correct? I did find a 3ph power controller up to 24kw, regulating voltage. Is this what you are referring to as a voltage regulator? https://www.ato.com/4-wires-scr-power-controller A commercial sparky was suppose to have...

total watt draw with all 3 motors (15hp, 5hp and 1.5hp if i go with the 1.5) is around 14kW. Im not sure what DOL means, but i think it means direct operating load, correct? if so, i am not finding anything on any of the websites for any of the motors I'm looking at for potential purchase for a...

From what iv researched on band/blade spd, there is an allowable varying fpm band speed. Smaller cut width mills use single or three motors. The mill im waiting 11 months to take delivery of (lt 15 wide) has a 36” cut width and motor choices are 10hp 220v single phase, 220v 3 phase or 460v 3...

how would starting the 1.5hp (or 3/4 hp haven't decided yet) running through a 10:1 rgb to only lift/lower the sawhead help supply power to help start the larger motor? I also do NOT want the lift motor running full steam ahead, NOR do i want my main motor running full steam during initial start...

@Evvy iv only come across 1 15hp motor that is more likely to actually be single phase. https://www.mscdirect.com/product/details/89372825 $8,000, I'm sure it would SUCK the amps, vs. a 3ph, but no listing on amp draw. the other 15hp motor is confusing bc it says 3ph in the title, but 1ph in...

Happy or not, there isnt a 15hp 1ph and options are greater in the 3ph range. Edit: What does post 2 have to do with anything? If its how my “shop” is wired. Already answered.

@Evvy Please read post #1 and post #3 I dont know where you got i have or looking at getting a 15k.

Huh? im not understanding what you are saying.