Search results

Just go slow on the non powered side. You have to work the dog legs out, but it all comes out. I did have a problem with stuck key, still need to clean up the chewed up edges.

For others that are looking at seals. The smaller seal on the shaft: 387 31 PAFZZ 5330-00-740-9697 7409697 19207 SEAL,PLAIN,ENCASED After some digging, here is what I found: https://mechanidrive.com/federal-stock-number-5330-00-740-9697-equivalent-replacement-oil-seal/ Also, looks like Timkin...

Yes. It took a bit of doing, but she's all apart. The other seal (smaller one) is ripped as well, so now I'm trying to locate it. Whacha need? The winch is apart, so any pictures or parts are easy enough to photograph and send over.

What do you mean, you don't have the sockets?

What else do you have? Also, do you ever come down to Rio Rancho area?

That seems like a decent price. What was the combined weight and size that you declared?

Do you know the exact size if 2 were put together and their combined weight? Also, do you have any other stuff for the wrecker (towbar, snatch blocks, wiffleboard/ hoisting bar, chains, etc.) that might be included on a pallet to help with overall freight charges? Basically most of the BLL items.

I understand. Freight like that only makes sense to throw it on a truck/trailer that's already driving thru the town (in my case ABQ) and I could meet a person at one of the truck stops on their way. Or, if other items are included/attached. I got the MT654 tranny sent to me a few months back...

I thought about that. While I have a lathe and could probably cobble something together, I thought that if the ball was somewhere around 2" or 2-5/16", simply threading or welding a towing ball into/onto the tube, would be an easy task.

I wish you were closer to me. I got the M936 wrecker, and it didn't come with any attachments. I need the spades, tow bar, snatch block, etc.

Anyone ever thought or did make their own spades? Officially called "Wrecker Field Chock / Mud Leg", NSN# 2540-00-315-2306 and 3830-00-315-2306 These are hard to come by, and I was thinking perhaps I could even build it so the spade end was removable and the arm could be used as a spreader bar...

Anyone know the torque specs for the front pump housing on the MT654?

Thanks guys. I just ordered this: https://www.napaonline.com/en/p/FPG3157

Is $17 for this 36"x36" a good price? I've never had to make my own gaskets, so don't know what to expect. https://www.ebay.com/itm/192436161517

For our older vehicles, do you find gaskets still available? I'm rebuilding the front winch and the 2 paper gaskets between the motor housing and wormgear cover need to be replaced. I rather just buy them but if they're not available or cost 80 bucks, I'll make them myself. Any sources for...

The winch is apart. Powered and non-powered side seals are definitely different sizes.

Need to locate TM 9-2320-272-20-2 Anyone got one they can share?

I'll let you know what it takes to tear it apart when I do it. Hope to work on it 2nd part of this upcoming week.

Yes sir. The left one (non-powered) is leaking like a sif. The right one holds liquid well. How do I know? I got sprayed all over when I removed a plug thinking that the left and right were connected thru the drum or something. ;-) Also, the main reason for teardown is to free the stuck lever...

Got it done. It took a bit more prying than expected, but she came apart. Sent from my iPhone using Tapatalk