Search results

Are you sure you need a 60kw for 1 50hp motor? If i remember correctly, a 60kw is 200amps per leg, and a 50 hp 3ph motor only pulls like 95 amps, I might be smokin left handed cigarettes this morning though

mep 804a maunuals http://www.liberatedmanuals.com/TM-9-6115-643-10.pdf http://www.liberatedmanuals.com/TM-9-6115-643-24.pdf isuzu motor manual http://www.liberatedmanuals.com/TM-9-2815-254-24.pdf

First thing I would do, adjust/verify the crank sensor is functional and in adjustment. That adjustment has been a cause of problems for alot of people, and its probably one of the easiest adjustments to do. I wouldnt use jumper wires on the shutdown solonoid/ governor, if I were going to...

I will make a small bet, whatever you have that is 3ph 460 will accept 416 and its amp draw will be 2-3 more amps than 460

that is correct, BUT!!!!.... your 240 leg will be more like 255-260

When was the filters changed last? Makes me think the filters got plugged when it was put to use. Other question, did you go thru the troubleshooting in the 9-2350-247-20 for a trans psi light? Where here in the panhandle are you? It might be easier if I come look at it in person.

You just type slower than i do

liberated manuals doesnt list the B on the -24, but the 9-6115-643-24 is what you need. The B is listed on the -10 above, and the -24P below. http://www.liberatedmanuals.com/TM-9-6115-643-24.pdf

Also plan enough time to go thru the uncle sams retail outlet store that is there. You might need to bring a bigger trailer than planned

Its funny how just something as simple as a sound is so calming and comforting.

Now if everyone would just be so religious, maintenance and operations are better than long term storage (barn rot) has killed more good equipment

disregard this transmission, my hose has an id of 4.7mm Daybreak, might need to send you a roll of it, see if it would work.

I may have lots of this hose in 25' rolls, I will verify dimensions first.

This was from another threat, i think he was only talking about the plastic switches here. my guess for your photos would be, version 1.... its blue and round.

So which one is better?

I dont think that mod will work on an 804, they are only 10 wire generators, must use an 004, its a 12 wire head

I]

This one isnt a 15kw, but it was military. csheath, is this what you were looking for? it is in an enclosure, the enclosure is an old minute man missle control box. This is will be my backup when it gets all wired up. We would have used it for a snow storm but I only had the cable in the...

I lnow he said he wanted a 80x, bit whats wrong with an oo4 with the single ph mod

I am guessing that a 15kw will be better suited. By his description it sounds like an older all electric home, and my guess is an older well motor with no soft start ability so the well by itself pegs a needle about 4k on a start. I think he would be gobbling up a 10k and running the chance of...