Search results

I have the exact same trailer/generator combo setup,it is the same fuel tank as a M37. Mine are MEP-016C,115 and 208 volt,3000 watts peak power ea. They are rare,grab it and hold on to it!!

Just reserved Chipmunk Palace #2,(same place I stayed last year)

Scoot,the G/Fs dually was the one cabell was reffering to,trans cooler line blew off,simple fix. I squashed mine between the M62A1 and a corner of my BRICK house on Sat. Hence my now wrecked dually.

After action report,ECC 2009 fan failure Well,this seemed the proper place to post my "after action report" on Oddball the Deuce.Went to Cabell's house and loaded the rest of my stuff in my now wrecked Dodge dually,also pulled the radiator for repair. Fan blade fractured about 1 inch below...

Well,as if the Deuce throwing a fan blade through the radiator during the ECC and the girlfriends dually trans taking a dump on the way to pick me up wasn't bad enough!! Since I was home and the wrecker needs work,I decided to clean it up and do some maint to it. After I got finished I noticed...

Well,I talked to Cabell at about 6:30 or so,he and Chuck were stuck in traffic south of D.C. I would guess they were there by now(9:40 PM). I think Cabell got the trailer picked up in Richmond. As for the stuff I was delivering to the rally,Cabell has the Deuce dump tailgate in his...

Well,we made it about 4 miles from the NC/VA state lin,ya'll missed the best part,G/F was coming to Cabell's to pick me up,and her dually had trans trouble,leaving her stranded along I-85.Well,Cabell,Chuck and myself went and picked her up and we came on the the house(mine),arriving about 2 AM...

Don't worry Tony,we are making our showing,at least 4+ trucks,maybe more.

Hmmm,well let's see For sale 3 sets of side racks for a M101 trailer(just the sides,no front or rears,needs wood replaced) 1 set of troop seats for a M1008(decent wood,good metal,some missing wood parts) 2 Deuce front racks(bad wood,decent steel) 1 HMMWV side rack(right side I think) 4 metal...

WM, I guess I am the closest to you going to Aberdeen,but I'm still like 5 hours away.I can haul it no problem if you can get it here.

I'm gonna try and make it Brian,I got the IP swapped on the Deuce tonight,wheel bearings tomorrow and wheel cylinder Wed.

Sucess!! We had a good turnout for this show,had 3 Deuces(1 w/trailer) 2 Jeeps(an MB and a GPW) and a M816 wrecker w/a 15KW genset in a M105 trailer.Just 1 slight problem showed up on the convoy back,Brian's(MDSA) deuce started missing and blowing HUGE amounts of black smoke,got it here and...

Well,I had one good top seal,and I used cut strips of an old inner tube for the other,just make em slightly narrower than the flange itself.

Russ, Sorry,I don't get here much during the day,The way I was gonna route you is a little different,but here goes... Take I-40 west to exit 107(Drexel) and turn right at the end of the off ramp,Turn right and proceed 4 miles on that road(HWY 114/Main st./Drexel Rd.) then turn left on...

Both my fellow SteelSoldiers members are correct,they are made of approx 1 X3 inch steel rectangular tubing and aren't able to be broken down for transport.They are the width of the trailer and about 6 feet tall.

Tarfu43,I have the correct bows for a M103 trailer,but no canvas,1 or 2 have frozen and swelled,but all 6 are there.

Gillispe this time,I used Averoe in the past(it turned pink!!)

I have toyed with the idea of selling it Kenny,but after spending all this time and $$$ fixing it I would have to ask $10,000 to justify my money/timeaua.Plus it's one of the most dependable trucks I have. Your engine is patiently sitting here,getting run every 2 weeks to keep it lubed,wating...

Howdy folks,just thought I would post a few pics of my M35A2C "Oddball" after I got it finished for it's 5 th trip to Aberdeen,finally got around to fixing a few rusty spots and installing a hardtop that also needed some attention.

Bump to the top for anyone who hasn't seen it.