Search results

I switched 2 rebuilt ones and they all are doing the same. Even had them tested.

hey man, I took apart the bulk head connector and everything looked great. I’m stumped on this problem. I have fixed lots of these trucks and know these things pretty well.

so I cleaned the whole gauge cluster, verified everything worked. Started the truck up. Everything was working perfect. After 5 minutes I loose, volt gauge, light bulb on start up, low coolant light. After I loose everything I tested voltage at the fuse panel and getting 28v. I’m starting to...

Update. i changed the 2 relays next to the starter relay and also the gen 2 diode. Nothing changed. I have my rear battery on a charger for now. I have no idea what’s going on. I may swap generators again and see if the problem goes to the other side. Idk I have replaced the whole system.

Fuse is good. Just switch it out or is there a way to test?

Ain’t nobody no nuffin?

When the truck is cold both my gen 2 light works and also my volt meter. After the truck warms up. Both of them stop working. Alternator is good And wiring is good. I’m thinking it has to do with the relays by the starter or the gen 2 diode behind the cluster. Anyone else have this problem?

I’m farm and they told me there are no restrictions. I even got pulled over 600 miles from SC in my pickup.

I have a few in SC

You were correct, it was a bad shut off solenoid.

So it will not shut off?

M929a1. Only does this in the summer Or when it’s hot out. my truck runs great, starts up great, but will not idle for more than 1-2 minutes, it dies like there is an air leak. It dies every time I go to the landfill waiting to go onto the scales. When it dies I try to start it back up and...

ill buy your Oem cucv lock cylinders

Was wondering if someone could get me a measurement on the front driveshaft. The round stock Weld to weld. Thanks.

How come you switched it out?

Oh yeah that’s a great price to fix them. Thanks for the offer on the blocks. This motor actually ran great and I just couldn’t let it go. I just didn’t have the heart to scrap it in. Worse comes to worse I need a new nose cone for the starter. I think this will be going into a dedicated...

I”m taking bets at this point

Anyone want to take bets on how long this lasts? This was another block I “fixed”

My switch is not sending 24v to the starter. I used a meter to figure this out. That’s when I discovered there are 3 terminals on the starter and was wondering which one goes to the switch.

No that works correctly