• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Pstyckiewicz

    P41 -Battery Wire? 348C Wire?

    Thanks for the information! That’s reassuring about the 348 wire. Thought they were just cutting all kinds of wires for fun. The P41 wires are connected to the negative terminal to my battery. I’m guessing it was for some sort of accessory that was in it before. It’s an M1152A1. There is all...
  2. Pstyckiewicz

    P41 -Battery Wire? 348C Wire?

    I have been slowly looking at my wiring and notice my P41 wires are all chewed up. Any idea what they might go to? In addition my 348c wire is cut and I have no idea where it goes. Any help would be greatly appreciated.
  3. Pstyckiewicz

    CDR Valve question

    No worries. Number 28 is what I need. I did a lot of searching for it but, I didn’t look in the technical manual for it. Now I know. Thank you
  4. Pstyckiewicz

    CDR Valve question

    Anyone know where to get the rubber cap/plug for the air filter housing? Part number or something that would fit. I’ve been to home depot but all the rubber pipe caps that are 3inch are actually 3.5 inner diamete.
  5. Pstyckiewicz

    CDR Valve question

    Maybe with big enough tires I could just float over.
  6. Pstyckiewicz

    CDR Valve question

    Thanks for the info. I’m returning the non fording one. Do you know what hooks up to the air housing unit? There are two spots that appear to need hoses going to it. There is a hose adapter near the intake stack and one on the back side of the air filter housing unit next to the intake. Thanks,
  7. Pstyckiewicz

    CDR Valve question

    This is the CDR I bought.
  8. Pstyckiewicz

    CDR Valve question

    So I bought a CDR valve that matched the one that was crushed up in the bed of the truck. My question is the one I bought and the one that was crushed don’t appear to have a deep water fording nipple on top? I have a 2007 M1152A1 6.5 turbo. I did notice that the turbo model CDR valve feeds into...
  9. Pstyckiewicz

    Hose to air intake and random wire ID

    I have one on order from Macmotors.
  10. Pstyckiewicz

    Hose to air intake and random wire ID

    I’ll check the A/C when I get home from work. The green wire attached to the body near the fuel filter area.
  11. Pstyckiewicz

    Hose to air intake and random wire ID

    Thanks for the reply’s. It is a USMC truck. I have the black cup, but they cut it up. I was wondering where that would mount to. As for the green wire it looks to be a grounding wire. I’ll have to keep looking for where it might have gone to. It is an M1152A1 so who knows what they were running...
  12. Pstyckiewicz

    Hose to air intake and random wire ID

    I am looking to identify a loose hose near the front differential. I traced it back to where the air filter housing is, but I’m not sure what it hooks up to down near the front diff. In addition I found a green wire that is cut. Not sure if anyone can help me figure out where theses things go...
  13. Pstyckiewicz

    Alternator Issue

    Won’t be disconnecting the battery again while running. I’ll take a look at Springers post and try to figure out what might be wrong. Thanks for the great info.
  14. Pstyckiewicz

    Alternator Issue

    I have been looking at diffrent things on my M1152A1 and noticed that the voltage meter stays in the yellow. In addition I unhook the battery the truck shuts off. It has the 200amp alternator. Is there anything I should check? Or bad connection?. And is this something that I could rebuild? Thanks,
  15. Pstyckiewicz

    Jump Start Hmmwv?

    That was the question. Do you need to have batteries in the vehicle (dead ones) to even use the slave cable jump pack. It would seem that they have batteries in it to prevent the + and - cables just dangling in the battery compartment. In addition, dead ones or not. They ain’t there. There are...
  16. Pstyckiewicz

    Jump Start Hmmwv?

    The ironclad insurance that’s on Govplanet for discrepancies. For example batteries required to start with slave cable jump pack. The description bellow is very miss leading. A vehicle would never restart without batteries. So anyone would assume that it would not start because batteries are not...
  17. Pstyckiewicz

    Jump Start Hmmwv?

    I have another question. Can you start a Hmmwv with no batteries and have a slave cable jump pack as they did on govplanet. Or do you need to have batteries in then put the jump pack slave cable deal. Just wondering if I should make a claim?
  18. Pstyckiewicz

    Jump Start Hmmwv?

    Update Got the truck the other day. No batteries. I did borrow some to get it off the trailer and into my driveway. Any suggestions on what batteries to put in. Leaning towards the cheaper options.
  19. Pstyckiewicz

    Jump Start Hmmwv?

    Also how about the Harbor freight 24v jump pack? Same result. If that is good to go I would get one for the off load and then return it.🤫
  20. Pstyckiewicz

    Jump Start Hmmwv?

    No pictures of batteries. I did observe that they had the seat still installed with a jump pack and slave cable to start it. So moral of the story is dead batteries plus jump parks attached and left attached to start will equal some electrical problem. Or is it just bad for the batteries...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks