• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. L

    M1083 5 ton Front Brakes and Information Needed/

    I am in need of parts for my front left Meritor Wedge brake. I did manage to remove the guts from the wheel cylinder. I do have kits. But my Brake chamber and wedge are not per se salvageable. The Chamber and tube I could probably reuse if I had to but the Wedge and Spring and the rod that runs...
  2. L

    M813 Starter Information Needed

    Thank you. Yes lets talk
  3. L

    M813 Starter Information Needed

    If I may ask, what is the amp draw thereabouts on a 12 volt starter for cranking this engine?
  4. L

    M813 Starter Information Needed

    Thank you very much
  5. L

    M813 Starter Information Needed

    The truck is wired 12 volts now and the only segment of it that is 24 is the starter. It is used in the Fire Service so I want to lessen the risk of Technical Operator malfunction. If you think that is goofy then I guess you'll think it's goofy
  6. L

    M813 Starter Information Needed

    Are they also 12 Volts?
  7. L

    M813 Starter Information Needed

    Are they also 12 Volts? Lugnuts
  8. L

    Looking for some information Please/ M1078 - M1083

    Thank you. Spare parts for these vehicles seem to be difficult to get a hold of. Lugnuts
  9. L

    Looking for some information Please/ M1078 - M1083

    Thank you for the information. I'll see what Cat has to say. Lugnuts
  10. L

    Looking for some information Please/ M1078 - M1083

    The starter works satisfactorily to get it started when cold, when hot the amp draw goes high and drags. The problem is not in the cables or connections. I hope this answers your question.
  11. L

    M813 Starter Information Needed

    In reply to the starter answer, and thank you for it, do tell more please
  12. L

    M813 Starter Information Needed

    Model 813 with Cummins Engine/ I am wanting to go to 12 Volt Starter and it would be wonderful to have a gear reduction starter/ I prefer Delco/ Anyone did this yet or am I exploiting unknown territory/ I don't have starter numbers from my existing unit/ All help is most certainly welcome Thank...
  13. L

    Looking for some information Please/ M1078 - M1083

    Question one - I was needing starter numbers, my tag is missing/ Caterpillar engine/ 24 volt/ I presume this starter is a Prestolite, I was wondering if I can get Delco instead/ Am I pressing to ask for maybe a gear reduction unit instead of direct drive/ The truck is a working brush truck and I...
  14. L

    M1078/ Location of Transmission Control Module/ Please!

    Thank you and Merry Christmas
  15. L

    M1078/ Location of Transmission Control Module/ Please!

    Thank you/ I take it you must pull the keypad and it will be located or incorporated into the keypad?
  16. L

    M1078/ Location of Transmission Control Module/ Please!

    I even read the manual and cannot find the Allison TCM/ It is stated to be with the VIM in the kick panel/ Located VIM under right hand side of dash but no TCM/ Definitely need assistance and thank you/ Merry Christmas\
  17. L

    Allison Code 2511 Output Speed Sensor/ M1078

    Do you happen to have a picture showing placement. Thank you for responding.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks