Search results

Thx

That is my plan as well thx

Ok thanks for the heads up will look in to the switch

Ok thank you

Just got delivery of this truck yesterday lots to learn , first learn about it and would like to find wiring schematic and a good troubleshooting manual and will be painting back to green and just started the build for a Allison 4500RDS swap with wet kit more to follow any help with manuals...

Finally is done after 2 years or so, of course I only work on it twice a month but so far so go , will replace front 385/80/22.5 for a set 425/80/22.5 does look tiny..

Thank you

Did some painting today

Not ready to road tested will be about 2 month when i think will complete it

Still got to paint and mout 5th wheel as well get rims and tires, probably be ready after Summer hope it rides good will see..

Trying to load pictures

After 2 years we are getting closer to road trip to recover a x AirForce flatdeck trailer, rear set up out of a 94 357 Pete 3.73 gears andfront axle out of the Pete as well , need a few things will probably end up with 425/65/22.5 in front , now the loners are 385/65/22.5 and probably super...

The pump on the M900 series 8.3 is similar but not the same as the smaller brother 5.9l, with that in mine, does mods will wake is it enuff for a great running truck as far of the EGT's the exhaust housing is good diameter so you should be good, probably would not be a problem unless you pulling...

Yes is strip down

12 wire

rewired I forgot to mention i only have good running engine and gen head nothing else , plus where i am putting it will be easier like a civic unit...

Did a good search and could not come up with anything, has rewire one of this units to 120-/240 volt with a aftermarket voltage regulator on like a zig zag configuration...

Yes you need a complete HMMWV 6.5 turbo engine or one out off a VAN, those are the only 2 options, the block is made for the center mount turbo with the oil feed and return by the block but also the head to intake bolts are 60 degrees instead of 90 degrees on a 6.2L , off course if the engine...

we put a turbo diesel engine with a tb 400 the factory engines where ruff

finally together Is being a few years that we took the turret of, this weekend we put it back on, next week we start with all the bearings and shim adjustment ...