• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NDT

    Need some opinion on value

    Why is that a parts truck?
  2. NDT

    Slow to shift 2003 LMTV

    That is your awful noise.
  3. NDT

    S-339/TKQ-2 RECEIVING SET RADAR DATA

    Probably not a historically significant system.
  4. NDT

    Slow to shift 2003 LMTV

    Check your u joint phasing! Wrong more often than not.
  5. NDT

    WC63 color mystery

    Does the key fit in an ignition switch on the truck? That is a huge hint that lends a lot of credibility to the China Lake NAS provenance. Airfield vehicles would have been yellow.
  6. NDT

    WC63 color mystery

    In my opinion, this yellow repaint was done by the first government agency that received the truck from war surplus. Could have been the California highway dept etc.
  7. NDT

    New to me 8x8

    I see uncovered exhaust leading to twin turbochargers. Engine is likely full of water. Sadly this is not economically repairable.
  8. NDT

    Bought a M915 impulsively and need advice

    Yup gauges should light up.
  9. NDT

    Bought a M915 impulsively and need advice

    Ok then you have a M915A1. Suggest you only run two batteries, 4 are only needed for arctic temps. Keep a 12 volt battery maintainer on each battery, the alternator on these trucks is the weak link, it does not like charging low charge batteries. Enjoy the truck, they are super reliable and...
  10. NDT

    Bought a M915 impulsively and need advice

    Well if it started it’s hooked up right. Tape up the light gauge wires. Do you have a lever controlling the transmission or buttons?
  11. NDT

    Bought a M915 impulsively and need advice

    Looks like you have the brown or tan wire going to minus, if that is your 12 volt feed, it needs to go to 12 volts. Suggest you be 100% certain of your connections lest you smoke a bunch of stuff.
  12. NDT

    M35A2 Generator

    That would be my suggestion. They are one of very few outfits that deal with these old 60 amp generators.
  13. NDT

    Identifying cut wires under dash - M1165A1 REV

    Sorry nope there are plenty more cut wires. Won't be too hard to figure out, these trucks are not too complicated. You will have wiring not included in any diagrams, that being the compressor and the IR light circuit specific to GMVs.
  14. NDT

    M35A2 Generator

    That is what Southern Automotive can help you with.
  15. NDT

    M35A2 Generator

    That is a Prestolite 5717244. Erik's Surplus has regulators for it.
  16. NDT

    Identifying cut wires under dash - M1165A1 REV

    Do you see the turn signal controller in other pics? That could be one cut bundle.
  17. NDT

    M35A2 Generator

    These people can help: Southern Automotive's Catalog Home Page
  18. NDT

    M1081A1 won’t shut off

    I would start by unplugging the under cab switch panel to eliminate it from being a cause. I think that can be done.
  19. NDT

    M1081A1 won’t shut off

    You are saying when you turn off the ignition switch, absolutely nothing happens? Did someone flip some of the switches under the cab? What specifically does “panel is Christmas lighting” mean? Flashing on and off? Every idiot light lit?
  20. NDT

    Case M4k TM

    Can we put these in the TM section please?
Top