Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Not sure how I missed this before, but tonight with the light just right in the garage I was able to see outlines of an old decal on the passenger door right below the window.
The letters are in all caps and appear to be…
APPEL
Not sure if it’s original or if it had been added at a later...
Does anyone know off the top of their head what size and pitch, or what the fitting is that’s on the fuel outlet on top of the tank? It’s a flare fitting originally, but I’m at work and can’t actually size the female side. I’d like to find a fitting to screw into it other than the original...
Let me start by saying, I have NOT removed any of my injectors. So I don’t know if they’re one hole or two hole.
#3 and #4 injector LINES are pretty rough looking for some reason, when previously removed for a HH removal, the threads were pretty well shot on the injector side of those lines...
Ok here’s my setup…
Lift pump - Airtex E8131 (commonly used!replacement)
When I turn on the main power, my pump kicks on like normal, and fuel pressure from the lift pump climbs to 6-8psi.
Then, when I start the truck, the lift pump pressure drops to 0-2psi, all while the secondary is reading...
While reinstalling the gear set onto my main shaft I noticed I do NOT have a key way for the 2nd gear, mine only presses on.
Moving to the next step is when I encounter a key way for the synchro sleeve.
Can anyone help? @m-35tom
Also, since I pressed on the 2nd gear with no alignment, it does...
I needed some new bulbs for my truck. I searched and searched and first decided to cross reference to Napa and place an order since they are right down the road. I placed an online order so I could pick them up after work. About 2hrs later I got an email saying they cancelled my order with no...
Has anyone set up their own headset and intercom system? I’m looking for a budget build, I don’t need new, I just need functional.
2 person set up with headsets, possibly up to 3 in case there’s a young’n in the middle.
Thoughts? Ideas? Any suggestions?
Thanks!
Had some time today so I decided to let my truck stretch its legs on some back country roads by our house. I went around the “block”, which was about 6miles round trip. Problem was on my way back I decided to go into 5th, shifted fine, went about a 1/2 mile crusading at 45mph and then came to...
Ok, let me start by saying my truck has ZERO pedal for braking. Most of you reading this know I just got my truck running the other day. The brakes are the next thing on the list that need repaired.(I do know I have one bad air tank, I have a new one in route and that will be replaced first)...
I have replaced a non working in tank pump with an inline recommended from this site. I now get 9psi when I turn on the main power.
I have changed all fuel filter.
I have bypassed the fdc
I have removed/bypassed the flame heater
I have pulled the HH because the button fell off. Reinstall...
I happened to be up under this new deuce I picked up working on something totally different, and being my first truck I found this cut air line, but I’m not sure what is missing or where it should go.. I have attached two pictures…
Picture one shows the air tanks and which air line I’m...
Hello, I’m new to this site. I live in Creston, Ohio, 44217. I know this might be a long shot but I cannot find anyone to help me get a deuce home. It is non running but does move. It is located about 35miles away in Cuyahoga Fall, Ohio, 44221. Can anyone on here help transport this back to my...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!