Search results

I am thinking about rebuilding a set of axles for my ultimate tractor build. The A2 axle has a flat bottom which is better clearance but less oil volume and the parts for the hubs cost more and are harder to find but it has CTIS. The question is on a mostly street driven truck is the CTIS axle...

Okay going to cross a M928A2 and a M818 and or a M35 maybe. Going to double the cab 809 front cab 939 second cab, 8.3L cummins, 809 or m35 front cap, 5 speed or more manual transmission, 936 wrecker transfer and pumps, and winches, 45,000 winch in the headache rack. This just a jump off point...

Poplarville Ms. Fairgrounds December 27 at 11:00 until we get run out. Rain or shine we have a building so come one come all. Post up if you think you can make it, no MV required. We can do some horse trading so if you want to post up what you want to get rid of or obtain.

How do you hookup a towbar to a winch bumper? The mounting points are missing!

I have acquired a actual gun truck named war wagon if a 923A2 with a LWS can be considered a gun truck. It was built with all the renforcements. I will have pictures soon as the weather clears.

Just noticed a oil leak around the CTIS fitting on my rear axle today. My ctis is not functioning so air pressure isn't pushing it out. Any ideas on what to look for?

Has anyone ever seen a 939A2 with a electronically controlled engine?

Okay I have seen a few guy fussing over the use of the (A0) suffix and it may be my fault but in my defense it came off base at Camp Shelby and I will try and see if it is Official or not this week. I believe that I have seen it on a list of vehicles on RSMS. If not then please forgive me for...

Does anyone else have any pictures or information on the Magic-pole tripod gantry crane. Got these scans from Mississippirifle.

On a M939 series is there any way to adjust the brakes on a trailer to not engage so quickly when empty vs loaded?

Okay this got brought up in a different thread and because it is a safety issue I thought it deserves it's own thread. The -10 says the wreckers should have 90 psi on highway, but the wheels are marked 85 psi maximum. I have looked at many different wheels and have not found any marked higher...

What is the S250 floor strength if it is not supported from underneath? I am wanting to put one in a bed that it will ride on the sides not the floor or will I need to support it underneath?

Putting a tool bed on a 3/4 chassis that I have. It had a 101a2 bed on it, I will post pictures of the conversion as it goes together. I will be putting my bobcat welder, oxygen and acetylene bottles, and most any tool needed to work on these vehicles on board. Idea's are welcome as this brain...

Hey folks that do and don't know me, all are invited to come, MV not required. All day Saturday December 27 and if you want or need to camp I have one or two hook ups and enough room for lots of unhooked camping. We will be doing some burgers and you can bring anything else if you like. If you...

Hey folks that do and don't know me, all are invited to come, MV not required. All day Saturday December 27 and if you want or need to camp I have one or two hook ups and enough room for lots of unhooked camping. We will be doing some burgers and you can bring anything else if you like. If you...

Anyone have a solid theory of why they put 2 pto's and pumps on the 936 wreckers? It is not backup for failure because there is only one hydraulic tank. The rear pump would be more than enough to run the front winch. No way they want you running both at the same time, so what gives? Seems to be...

Has anybody tried putting the head back on with just some gasket maker and no gasket? I have replaced my gasket twice now less than 500 miles.

Anybody else have a A4?

I looked at the spread sheet and stickies but no joy any one know where I can get new parts for my brakes not just shoes and diaphragms. All the other small parts for rebuild, yes I can go pull some but I want new.

Has anybody tried this? I don't like the 939 series battery relocation setup and think an 809 setup will work.