Search results

The filter I found specifically stated it was for the high side and should be spliced into the output of the compressor before anything else. The only filter I found, that apparently leaks, is from 4 Seasons Air, and it also sold under the GM Delco label at a higher price of course. I did...

I continue to make one step forward, three steps back in my AC repair. Thank you sir, may I have another! :unsure: I get another two quarts of AC flush and flush it a second time. All pipes, all connections, in the reverse of coolant flow. a new compressor, second one, and new receiver dryer...

I used this one and it works with a complete LED conversion: 11613631 Turn Signal Flasher Switch 24 Volt Military M151 M38 M35 11613631 I had it installed for more than a year - no issues so far.

I would try the 40 steering wheel stop-to-stop PS air bleed procedure before replacing anything. EDIT: Lift rig so that front tires are off ground. Engine off. Turn steering wheel to lock, and let it sit for a couple of seconds and then turn opposite lock and let sit for a couple seconds...

Yeah, 10 AMP should cover it. Just don't use a thin wire. For 24V relays - these will work 40 Amp 24V DC SPDT Relay Socket

Try wire 29A on the Master/Start Switch, but that was for my model. Refer to the electrical diagram. Make sure you fuse it just in case...

I was thinking that it might be good to have the engine fan run continuously when I had the AC on. After having installed this way for a few months, I found it unnecessary and disconnected the AC lead shown in that diagram. It just eats HP up when you do not necessary need to extra air flow. So...

Once again, @Mogman you seem to be correct. I believe I did not flush it enough the first time the compressor crapped out. I tried flushing it out a second time but it was too late. Yes, I disconnect all the lines and flushed everything in the opposite direction of normal refrigerant flow. I...

There are some excellent threads here on the transmission options. It is common for us to convert to a 4L80 as you get Park, plus the ability for higher top speed.

Old thread, but I thought I would post my experience in-case it helps someone in the future. I had an aftermarket AC system installed in my M998 that had the 5 slot fan pulley. Originally, however installed it red neck engineered some bubba brackets out of flat steel. One of the brackets had a...

Gosh you embarrass me for complaining about the Florida Inferno of only 95 degrees with 90% humidity! Average day, feels like 105 in the sun. With only 14% humidity I would definitely get me one of those cooling fans that spray water mist. Here in Florida, they only thing those things do is...

It was cloudy today, so I figured I would hook up the gauges and see if I did not get all the crap out of the lines. If the new compressor were crapped out, I would see a low high side reading. Instead when I started it up, the AC was ice cold again. With 90 degrees outside, I think these...

Just so you are aware, the horn is ground triggered. So when you push the horn button, the wire going into the switch is grounded.

I don't have a pic handy of him driving in his rig, but this is Binky. He likes riding high so he can spot his friends.

Seems my HMMWV repairs usually ends up being one step forward, three steps back... aua It was sitting for several weeks since the beginning of Inferno Season here in Florida. I cannot take the inferno anymore in my old decrepit state and if I do go outside with the intent of working on the...

No, has not fell off yet. But I always use a impact gun for nuts on a shaft that rotates.

I was watching the news and saw the Taliban parade our equipment. Many of the HMMWV, trucks and other rolling thunder had white wall tires? Here is one picture I found. Maybe they just painted them on. Looks like they also did some pin stripping on some of the vehicles too! Please tell me...

I have the same issue around here. There are certain things that I know will quickly get over my head. For example, alignment. I think the IP would be another. Plus anything that requires welding, which I cannot do. What I did is call around to every shop that specializes in diesels. Most don't...

@Mogman I got to ask if you also have a clear copy of the wiring diagram for the M998? I have never seen such a clear copy! That would be awesome!