Search results

As mentioned in the previous message, don't trust the gauge I just worked on mine today, I replaced the temp sensor since the gauge was erratic, usually my temp gauge would hit 200 and the fan would go on, now it stays at 240, once it its 240 , then fan clicks in. I checked with my laser and...

Hummer Parts Guy Sent from my iPhone using Tapatalk

I like it. [thumbzup]

Got this one for $3.95

I liked the part where they state that the windshield frame is a roll bar Sent from my iPhone using Tapatalk

Throwback Wednesday https://www.youtube.com/watch?v=nuWwCNmykhI

I got stuck the same way, it was low on power and then it stopped Here's what I did, i posted this a few times, not the best way , but it will get you going Remove the hose from the fuel filter going to the injector pump, get a funnel and pour fuel into it, crank and see if it will run If it...

Also check the o-ring on the oil fill tube on the top front

LOL. 3K on the RPM is max for me. Sent from my iPhone using Tapatalk

Yep. That was top speed on a flat road. 60 is the best speed for it, might go 65 for passing. But that’s it. Sent from my iPhone using Tapatalk

Mine is a 1989 M998 Max speed is 71.5 MPH, you can download an app on your IPhone for vehicle speed Highway speed is 60MPH and the tach is at 3K RPM

I drive mine nearly everyday from April till December, it's not my main ride, unless I get a warm day, also anytime I go to HD or anything else I drive it. I'm about 5 miles from work, so if it's cold it takes forever to warm up, but come summer, I put the pipes doors on and I'm on the road I...

Well here's my 2 cents worth. Do your research first, if everything has been done, then of course the price is higher, but like Juanprado noted, they are flipping to make money But, if you have the time and mechanical knowledge, you are better off buying a cheaper and fixing it yourself, at...

This is dated, but the info is the beginning of the Humvee https://www.youtube.com/watch?v=QZvm65VzO8U

Found this on you tube, the Humvee was made to go where an M1 went and to access tunnels in Europe https://www.youtube.com/watch?v=QZvm65VzO8U

I used these on the drivers side, from E-bay The front passenger side is bolted to the cover

Bump Just want to be in the loop Thank you

You can also stop at any parts shop and get exhaust repair tape or kit, similar to JB weld for metal repairs it's a quick $5.00 fix

Just finished shimming the rear, not too bad of a job, there is a lot of prep work, i started with 4 shims and measured from there, one side had 5 and the other needed 7 shims I also went with the 2 part seal, got the tool of of e-bay and if you plan on changing the output seal, you will need...

Did you check the trans fluid ?