Search results

G'day everyone,..... Well I think those front ones must be speed holes so I guess that would explain the square holes on the sides,.... The air flowing through the front holes creates static that is stored in the body until the mass can no longer except any more electrons. The excess is...

G'day everyone,...... Yeah, that's what I thought as well,... So what are the square ones for along the side? Aussie.

G'day everyone,..... Well yesterday I stretched my engineering expertise and mechanical knowledge to the extreme limits of the human experience. Yup,... I fitted rubber grommets to those small holes. Not sure what thay are there for really. (the holes) Next job is the...

G'day everyone,..... Regrettably I have had to halt the deal with the C1500's as I have logistics issues that I can't resolve. Also the amount of work and time it will take is just a shade more than I have time for just now. I have though found a better replacement vehicle for what I intend...

G'day everyone,..... Or I could weld a second one to it and make a big fuel tank,...? ;) Ok,... I gone and done it. Made a deal and I now own 2 International Harvester C1500's and a spare used engine. Aussie.

G'day everyone,..... All the junk in the back, and that bathtub will stay,.... ;) Turns out it less than an hour away from me,.... That might be a good sign,...? Aussie.

G'day everyone,.... Well here I am again, I was just looking for an old farm light truck to use as a general use workhorse. I wanted something smaller than the Deuce. I came across this ex Australian Army International Harvester C1500 It runs and drives according to the seller...

G'day everyone,..... Just to add to my post above,..... My M105A2 has a number stencilled on it on the front, on the frame at the back and on the tailgate. Not the same as stamped into the drawbar, what might that one be? Dose'nt look like unit ID. Aussie.

G'day everyone,..... Just a couple of questions: 1) Dose the M105A2 have a serial number? There are 2 numbers stamped into the drawbar on mine and I don't know what they are for. 2) Dose it have a build date stamped into it anywhere? Only date I have on mine is the 'Reworked by VSE Corp...

G'day everyone,..... Yes, I was describing an OHC system, my bad, force of habit as that's what I have mostly worked on. So, in the case of a pushrod system I rotate the engine until the pushrod/tappet reaches its LOWEST point and that's when I'd check the gaps and make adjustments as...

G'day everyone,.... Anytime the lobe is pointed upwards there should be the least amount of pressure on the valve stem and the valve should seal. So on any valve you are going to check/adjust make sure the lobe is pointed upwards. Inlet and exhaust gaps will be different. Aussie.

G'day everyone,.... When doing valve gaps/adjustments I've always made sure the lobe was pointing UP and then simply check your gap and adjust as needed. Works every time for me. Aussie.

G'day everyone,..... Well I take my Deuce back into storage in a few hours, still haven't done the oil change due to rain. :( :( :( I to need to fit a seal in the fire wall where the steering go's through. My cardboard one that was there mostly disintegrated when customs 'cleaned' the...

G'day everyone,..... Well this morning I got my deuce out so I can get the oil change done,.... As soon as the hood came out from the shed its stored in, it started to spit with rain,... On the way home it rained. Forecast for the next 3 days,... intermittent rain! sigh,.... Mrmag1...

G'day everyone,..... Well, just dropped the Deuce back into storage after having it at home for about 3-4 days,.... Was meant to do its first service but the day I got it the weather here changed,.. got so #$*@ing cold,... I did get to change out the coolant though at least, the reason I...

G'day everyone,... Sorry for the blur but I think the heat from my hands caused the lens to fog up. The Trailer blackout lights. Deuce blackout lights. Trailer rear lights. Deuce rear lights. And front park lights. Aussie.

G'day everyone,..... Well I am back with my Deuce, going to do its service this weekend. But, this being the first time they have met I backed the Deuce up so I can plug in the trailer cable to see if the lights work. Well YIPPEEEE!!!!! They work great! Even the blackout lights work...

G'day everyone,..... Yeah I tend to do that as well,.... I'll put a little drop of light oil on screws and nuts and bolts to stop corrosion, you can still tighten them without them coming undone and it dose make it easier for next time. I just used a little oil on the landing gear pins for...

G'day everyone,.... The other day I Swapped the bolt around to clear the light. Yeah, I did the other side. Then I got out my Hi-lift jack to hold the front of the M105 up so I could raise the landing gear and lubricate it as needed. Yeah, it looks a little dry in...

G'day everyone,.... Today I installed the new connection cable for my M105A2. https://www.steelsoldiers.com/attachment.php?attachmentid=737548&d=1533968134 https://www.steelsoldiers.com/attachment.php?attachmentid=737546&d=1533968130...