Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Rear axle work continues. Got it completely disconnected from the springs. Pulled off all 4 wheels so I wouldn’t mess up the tail pipe. Started scraping and brushing off years of dirt, grease, oily dirt, greasy dirt, and a couple layers of thick red paint. Fortunately, the paint is flaking off...
Got the rear axle off today. Took a bit of hammer work to knock the u-bolts loose. I’ll roll it out the next semi-warm day and sand blast it. After that, replace the input seal and look at the wheel bearings. The brakes were gone through by a local shop for the previous owner. Hope I don’t find...
All the plates are now gone. The last four took about 5 minutes each to remove. Those welds were pathetically poorly made. Most of the welds after removal of the plates could be easily removed using a hammer and chisel. Anyway, I ground down all the welds then cleaned that up with a flap disc...
I’ve got to be more diligent in my posts. I spent the last year+ cleaning things up in the shop. Got a long ways towards being able to find stuff again. Also, after looking at the G506 for that time, I’ve decided to abandon the fire truck plan. I just don’t have enough to put one together. The...
Doing fine in Laramie County WY. If only these winds would knock it off… getting ready for the Christmas parade and several Toys For Tots events.
How goes it there?
The individual in the story was a retired soldier who spent his career in scouts. He was addressing a group of “trainees” that couldn’t tell their back end from a hole in the ground. IMHO, he was commenting on their lack of masculine characteristics.
That just plain sucks donkey water through a sewer hose 🤬! Up here in Wyoming, I haven’t had any problems with titling my 10 military vehicles, the oldest of which is a 1944 G506. I’m a firm believer in Karma. These poofters are going to get a big Karma bite!
I remember seeing the pilot with a black skid mark on the top of his helmet. They were just RTB when I got to the duty section. That’s just too close. But then again, a miss is as good as a mile! Not sure what happened to the remains. Cooter brought back one of the tail rotor blades.
It was a...
The Marine Corps upgraded a few A models. They put D model engines on it, the D model main gear box and some other upgrades. That was way back in the late ‘70’s, early ‘80’s. The active squadrons at Tustin used them, and they were hot rods. On the other hand, some D models got elastomeric main...
You could check out my build thread. Look for jeffhuey1n under the gun truck section. My best advice is to buy several books on the subject, especially the James Lyles book. David Doyle has a couple excellent books on the gun trucks as well. Other things to look into:gun mounts, regardless of...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!