Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks to you all. The schematic allowed me to trace the wiring for cb45 to the master switch that would then activate K1 & K2 and with a little inventive wiring it started right up and everything work as it should.
Thanks Ronmar , I did find the schematic after I messaged you and was into the kick plate and didn't see any relays but I will look closer. I check the voltage on the dash switch and found it to be 14 volts -- I assume this should be 24, I will start checking grounds now with the help of the...
First of all thank you Ronmar. I have power at 12
First of all thank you Ronmar. Yes I still have good voltage when the ign switch is turned on. CB 45 has the 24 volts required but my circuit board has no K1 or K2 . Are these two relays somewhere else and are they relays? The master...
ran great --shut it off and one month later no start no gauges batteries up have 24+ volts at the circuit board,12+volts also . Checked fuses good no power at 24 volt ign or 12 volt ign what am I missing?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!