• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. D

    Will start only with a squirt of starting fluid. Runs great once started.

    Maybe the HH itself is getting tired…
  2. D

    I’M BLIND!!

    I would try some lube/oil first.
  3. D

    Brake help support after new master cylinder

    I did two rounds of bleeding my deuce. Still had a soft pedal. Built a pressure bleeder, bled again, perfect pedal. Like you, I’ve done it dozens and dozens of times with other vehicles, but I just couldn’t get all the air out on my Deuce without pressure.
  4. D

    Will start only with a squirt of starting fluid. Runs great once started.

    How is your flow back to the tank via the return line?
  5. D

    And then I had one

    Scrap around me is WAY down…on everything
  6. D

    Best Antifreeze/ coolant for M1165a

    IMO whatever the cheapest 50/50 premix is!
  7. D

    Must Have's for New Deuce?

    Swap in a 6bt cummins. install air lockers Better/more comfortable seating Custom rims, or Mrap swap for radial tires
  8. D

    Deuce Fan mod/ upgrade

    Would you happen to have a part number? Just curious
  9. D

    Misfire M35a2

    I would think an electrical issue wouldnt mess with this type of mechanical engine. If that’s the case, and you think its an electrical issue, maybe it’s messing with the lift pump???
  10. D

    Misfire M35a2

    Stuck open or leaky injector maybe?
  11. D

    Question about frame/ rail bumper extension

    Local fab place might be able to make some brackets for cheaper; plus minus shipping
  12. D

    Deuce Roofs?

    After some googling here’s what I’ve found… Pic one is from Eastern, the large number “MFR-5U403” matches mine. But the ordinance number does NOT. It is listed for an m35a2(plus others) Pic two is from Oshkosh, although they don’t show a picture of the tag, what they have listed as the...
  13. D

    Deuce Roofs?

    Well bummer, woke up this morning and finally put a tape measure on mine. Guess what?!? It’s to big/long…by about 10”, the width is correct. So the data plate is correct, so either someone swapped that, or who knows. Anyways; this really sucks for me, I’m out some cash for sure…
  14. D

    Air horn setup?

    Your truck should have one already unless it has been removed. Love my air horn and so do the kids haha
  15. D

    Deuce: I just broke my primary fuel canister

    I removed my primary assembly after it to rusted to pieces. I replaced mine with a Wix 24770 filter base and a Wix 33405 filter. The base has 1/2” inlets and outlets so a few easy fittings and it’s connected
  16. D

    Mraps on the front

    Simple answer; Yes
  17. D

    Deuce Roofs?

    Now you have me nervous HAHA mine is still in the garage waiting to be installed. I may have to measure this evening HAHA
  18. D

    Deuce Roofs?

    Here’s what mine looks like…
  19. D

    M35 A2 transmission top cover

    I’ve had mine apart. It’s not to bad actually. I don’t remember the TM off the top of my head though. I would really give it a go. Or message me and maybe I can pull one for you for cheap
  20. D

    Deuce Roofs?

    If you were closer, I have one in Ohio…bummer
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks