Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
ok i just reread your post and this is what i was thinking if its "making oil" it is most likely fuel in the oil you should be able to smell it i would recommend you drain the oil and see if there is any antifreeze in the oil pan another question is does the truck have a pyro? I ask because i...
from what you have done so far you have identified the problem to be the fuel system it seems like you still have a skip if you crack the lines do you still have no fuel at the #1 nozzle? if you have no fuel you have a pump or line problem try replacing the lines first you said they are still...
OK so there is a chance that My buddy BigJoe is able to get winch Parts from a xm211 and we where wondering if the parts are interchangeable i did some searching in older threads and didn't like what i found so i was wondering what is needed we have bumper ext and the winch already but thats it...
In my experience all the seals that have leaked after being replaced have been installed wrong or were broken during installation since your there do the seal and have the flywheel faced worth the extra comfort knowing it was done right and you know you wont have to do it again anytime soon
how does the centrifuge work i have not read up on them but i know how to make it from wvo i have made small batches usually a gallon or two oh and im running it in a 1989 f-250 so im not worried about the newer direct injected engine i do want to know if the 1994 to 1998 7.3s can run on bio or wvo
thanks for the info but im looking to see if there are any home made ones around i have barrels and i can get pumps i just want to see how other people set there systems up
Ok so i have been searching for pictures of home made bio diesel processor because i want to make my own processor because im still in college and don't have 4grand to spend on a new one so if any one has a home made system post some pictures so we can all get some great ideas how to make or...
:ditto:
I have done some research on bio diesel and thats what I have read. the methyl oxide is what eats seals but when water is added to wash it it removes the catalyst
I would have tried to mount it on the roof of a hard top cause if you got it in the bed you could probably get it on the roof and then coming down is the easy part those tires are a little too close for me not that im worried about rubbing its the stuff on the trail if something hits the spare...
I have found that if you air down to half of the tire pressure you would normally run chain up as tight as possible and re-inflate to the normal pressure than you will not need the black bungine cords to hold them on
i have a few concerns first if your getting more power that is not a symptom of clogged filters. more power and smoke would be a result of more fuel being introduced to the engine
second if you changed your filters make sure they are the correct ones your primary filter should be some where...
I wasn't planning on seriously competing with it kinda just for show but my friend and i want to pull against each other kinda see who is better haha but i will try to talk to the guy in charge of the event
So My friend and i have been attending the fryeburg fair truck pulls in ME.
we have been thinking about entering the deuces in the show but i have a few questions
1 does anyone know who to talk to to enter them
2 what mods need to be done safety not performance want to keep the truck as close...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!