Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
its not uncommon for some squeaky brakes on these trucks, the OEM pads on a 52 are a very high metallic content, you have solid rotors if you are a Serial number under 300k. You need to check rotors and pads for wear and grooving, a pad slap won’t do much unless you go to a softer pad, which you...
32vdc on the IGN? You have a bad regulator
17vdc on the 14v Tap? Bad regulator
AC is a signal….not voltage.
what is the running battery voltage? I would venture to guess 32vdc, same as IGN…. bad regulator.
The ibistek is no longer authorized and is replaced with the other non- egress windshield system Used in most trucks.
in the military, if a single piece of glass is needed for ibistek? You have to order the new kit with armor and glass.
you cant Just use a different model pump and expect it to work correctly, the 4879 is for a 1990-1/2 and above 6.2L engine.
being there are so many auction trucks that were reset, verify you have a 6.2 and not a 6.5, it’s not completely uncommon for the military to have installed the wrong pump.
if a gauge is maxed out, you have a wire disconnected, the voltage gauge only has 2 wires, 24v and ground, use a multimeter
to determine your true alternator output.
Ok, so for everyones knowledge moving on, the ECV/REV have the ability to clean under the 2 radiator stacks, there is a kick stand at the top and the bottom is hinged on brackets, the factory hoses on all sides have ample extra hose and fitting to move the top cooler, the radiator is suspended...
the auctioning of Hmmwvs is now at 11 years, the only turbo trucks being auctioned are and continue to be be USMC trucks, these trucks are what is known as “Exchange program “ or now called “Harvest” trucks, GP buys them directly from the USMC for an agreed value per contract, this is not the...
A starter will only grind for a few reasons…
no flexplate teeth
weak solenoid
bad bendix gear
missing teeth on the bendix
have someone attempt to start the truck while you observe the bendix gear working, obviously you need to pull the inspection cover to do this.
A seized motor wont grind the...
ive had that same plastic chunks fall in the armature and cause a runaway engine while driving…it jammed the armature in full open as I was getting onto the freeway on ramp.