• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. B

    Cold starting a m1009 cranks a bit before start.

    forgot to add it also looks to be wet near what I assume is throttle shaft, Where do I source a new one?, or atleast the o ring that it's prone to leaking
  2. B

    Cold starting a m1009 cranks a bit before start.

    i thought the same thing with mine, replaced it with a new one. And no change. also changed out the water in fuel sensor. and changed the filter. One thing i did notice is that the valley under the intake is a little wet, might pull the intake and check the lines under there, theres 1 going to...
  3. B

    Cold starting a m1009 cranks a bit before start.

    When i bought the truck, i had and issue with fuel draining back to the tank. Replaced lift pump with an AC delco w/ check valve, and that fixed that problem with drain back but truck takes about 10 seconds of cranking when cold before it fires up. When warm it starts up instantly. Also...
  4. B

    Mile Marker hubs?

    When i bought my m1009 it had a set of milemarker hubs on it, ive had them fail; The metal arms that lock the hubs in ride on a threaded plastic piece that pushes it out when you turn the dial, my problem was on one side the arms came out of the threads. Poor design and left me without 4x4 and...
  5. B

    m1009 starting issue need some help

    Fixed.. Plugs all tested good. Even the old ones but i woudve replaced them anyways. Found out that the glow plug controller card previously had been replaced with a cucv electic "legacy" which surprised me. Anyway Problem ended up being the junk glow plug relay, After stopping at a couple auto...
  6. B

    m1009 starting issue need some help

    Right, I have that TM pulled up on my phone ready to go.
  7. B

    m1009 starting issue need some help

    Parking nose down does nothing, which is what i assumed was the problem at first, drain back. Now im leaning toward glow plug related since it starts right up on really sunny days, and while cranking white smoke. Ill pick up a multimeter today and do some testing, i know the glow plugs are good...
  8. B

    m1009 starting issue need some help

    Ive been parking it nose down, started right up on one hot day but thats it. Also with a bad relay will the wait to start light come on? Ive been thinking that was the issue but havent done any readings yet, and i cant source a new one out from any autoparts store. Gonna get a multimeter today...
  9. B

    m1009 starting issue need some help

    I will go out and get one tomorrow. but just trying to figure this out. What would cause the glow plugs to not cycle, or possibly not turn at all? WTS light comes on, when i turn to on i hear one clunk but thats it. Its been sunny so when i started it the other day it cranked right up just like...
  10. B

    m1009 starting issue need some help

    Bought this truck a week or so ago and its had this issue since i bought it. Crank crank crank in the morning trying to get it started, After its been started it starts up right away. Till it sits overnight. thinking it was glowplugs i replaced them with ac delco 60gs. Still same problem. when...
Top