Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Hi,
After the last time you ran it, did you top it off with Fuel? For some reason these things don't like to run on a over filled tank.
Just to check. You have the dead crank switch in the run position. Yes? You have the Circuit breaker push all the way in. Rite? The fuse is good. Rite? The...
Thanks for the concern guys. Yes I put the Diodes in correctly and looked over everything. Cleaned the Fuel tank & filled it half way. All new filters, Oil, Air Fuel. Cracked the injectors and after letting it prime to fill everything, I tightened the injectors and cranked it over. Took two...
So, Heads up guys, when you are going to bid on a Gen. set of the 802A or 803A, look behind the control panel and to the left to make sure the DIODES are not missing.
I just want to pass this experience on to you all. I sure have learned by it.
Good luck To All..
Thanks
Raymond
Ok you Guys..... That's all it was, the CR! & the CR2 Diode. Put all the fluids in and she started rite up. Has power and everything seams to be working.
I post a Video on YouTube and post a link to the Video here.
I hope all your guys fixes go as simple as this did for me.
Thanks Again...
Ok, what I found, I am missing two Diodes on the Bridge Rectifier Assembly ( CB1 & CB2 ) Now I need to find the Value of the two Diodes and install them, That should put power to everything that's not getting it now. I'll try to post a couple of pictures, one With the Diodes that's on my 802A...
Hi everyone.
I just got a MEP-803A everything looks to be all there and connected properly. Problem is it won't crank. I Have had a MEP-802A for some time now and know about the Kill switch, DC control power circuit breaker Button behind the Panel and the Fuse.
I did a little testing with the...