Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
My 77 M880 has an electrical issue. All lights abd signals work but when I hit the brakes, the left turn signal (front & back) stop blinking when the brake lights come on.
Any help appreciated.
What about cutting an access hole in the bed above where the sending unit is located and then fabricating some sort of plate to bolt back down? Keep in mind I am not going to enter the truck in any type of beauty contest in the future, although shouldn't look that bad if done right.
Would save a...
I am finding that the fuel sending units for my 77' M880 are nearly impossible to find. I am looking at a Datcon universal adjustable sending unit that is within the ohm range for my guage, assuming that it is 5-10 full and 60-75 empty.
Has anyone used on of these, plus can anyone tell me the...
77 M880, lights turn signals work. Emerg. flashers do not work.
Brake lights did not work. have hot feed to brakelight switch, but white wire running to back showed it was shorted with tester.
Ran new wire from the switch to back wiring harness and tied it in to the 2 yell/stripe wires and...
Removed the radio suppression system last night, just put it on Ebay. Still need to rebuild the carb.
Are the u-joints a stock item that I can order as a Dodge W200?
Are the fuel tanks in these metal or plastic, I seem to be getting some rust in the filter, don't know if it's the tank or...
Thanks for the info.
Any suggestions of increasing fuel milage?
Going to rebuild the Carter 2b, noy unless there is a better one out there (replacement) that will give better performance plus milage.
OK, I believe now I have a M882 that has had the 24V removed, but still has the shielded plug wires and plugs. Instead of switching it all out, are there shielded replacement plugs on the market, or am I better off changing it all to a newer civilian set-up, but I am hoping the civilian dist...
Is the suppression system better or best left on verses updating to modern?
Plus, you are saying I can leave the original dist. in and it will take a madern cap?
I'm sorry, I think it's called a radio suppression system (dist. cap & wires), can I just put a regular cap and change out the wires and plugs with the existing distributor?
I just got a 77 M880 that has the old military resistor distributor cap and plug wires...etc.. it was a communication vehicle.
Can I easily replace this with a stock cap and wires, is there any modification. The existing cap looks taller than a stock cap.
Any help appreciated.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!