Search results

I'll see if I can get some pics tomorrow.

I've searched the forum and read the TMs and can't find anything on the problem I'm having. My CTIS on my A3 seems to be working fine, except that in highway mode the tires are inflated to 60 PSI instead of the 45 PSI that they should be. I haven't checked the pressures in the other modes...

I just found it in the TM. It's the rear spring seat bearing or bushing. Not sure which one mine has, but it's out.

Not the dogbones, but the shaft that the dogbones connect to. There is a grease fitting on the bottom of each end of this particular shaft. I can't find anything about it in the TM.

There is a straight shaft in between the rear axles on my deuce. It is connected to both axles by what look to me to be some type of stabilizer arms. The ends of this shaft are connected to the leaf springs. There appears to be some type of rubber bushing on each end of the shaft, and one side...

Yep you are right. I bypassed the dryer and all my air pressure problems were solved. Is it worth the $48 for the rebuild kit? I found a brand new dryer on ebay for $120.

So I got the brake issue resolved. When the u joint went out, one of the caps broke and part of it flew up on top of the brake linkage. The first time I mashed the brake, it must have rolled down and put the linkage in a bind to where it couldn't come back up. Easy fix. Thanks for all the help...

I read about the push rod adjustment, but it doesn't seem to me that that would be the cause. I'm thinking like you that something is binding. It was all working fine last week. I had a u joint go out between the tranny and transfer case. Put it together today, and now brakes are sticking. I'll...

This is a truck that was in someone's possession. It was being used as a water truck in prescribed burning applications. The breaks work great. Pedal goes down about 2", but then won't release. I am not building very good air pressure right now. The air dryer is in continuous purge. Pressure...

Thanks guys. I haven't been able to look at it really well. It was getting dark when I pulled in tonight. I'm going to look at it closer tomorrow morning, just didn't know where to start. I'll read the manuals and go from there.

I'm a new deuce owner and need some help with a brake problem. I've searched the forum and it's left my head spinning. I've read about push rod adjustment, air pack rebuilds, and master cylinder rebuilds, but I still don't know how to diagnose my problem. What's happening, is my brake pedal...