Search results

A good place to find stuff like that is www.themotorpool.org. There are alot of little tricks you could find there. As far as the glow plug system a good way to truble shoot it is that when you turn the start switch to run and you have no wait light the PCB box is bad, when it flashs the...

They are not hydrolock problems, if you take the fly wheel out and look at it, the starter only strikes the fly wheel in 4 spots. that is why some times it does it and some times it doesn't. You will have to replace the starter and fly wheel. Tryed just relacing the fly wheel before and had no...

I would have to say Westech is right. does sound like starter and fly wheel are bad. You'll have to replace both. Sounds like a flat spot in fly wheel. Turn the engine over by hand at the crank, sould only have to turn it 1/4 turn or so and should start right up, though it will sound real bad...

Well I learned that you cann't take a privates word on anything. It turned out that he hooked up the starter wrong, after I asked he if he hooked up right 3 times:evil:. And I don't know were he was checking for power at the starter, but the relay worked and I checked for power and had it. So it...

Thanks Mike I'll let you know what I find out on mon.

Thanks Mike I will take a look at the relay on Mon. and let you know what I find, My last ? is because I haven't checked it, could the relay be bad and still make the click sound like it is working?

Yes you can get a 24v starter from them, I will post the part # on mon. when I get back to work to look at the starter. I have battier power don't know what it is, my helper checked but no power at little one.

That hole you see is a water drain hole for the valley which sould be hooked to a tube that exits the side of the block in the back. that engine will work for you, if don't us the serpentine belt system, I think you will have to replace the water pump, the bolt holes for the old pully will not...

Well I can tell you that everything on the dash works the way it should when I turn the key on, as far as the starter it better be a 24v one, didn't think to check when I put it in, never got the wrong one before NAPA is good to us. But some dumb a_ _ could have mixed it up on the way. And I...

if its a hmmwv or cucv it could be the fuel pump. had a hmmwv do that before and it was the pump. diaphram went bad and let fuel in to the block.

The starter is good, new from NAPA and was tested before we bought it. I have no power to it to do a draw test. Mike any chance you could come out and look at this before I lose my mind, cann't pay you, but do have duce parts you may want in return. Is there a fuseable link between the starter...

All the connects are good and yes the bracket was installed. I'll have to check the relay, didn't think to earlyer because I heard it working, but will check it anyway. And I hate the TM for them, I'm a HMMWV guy, I think they are more trouble then the are worth. Were in NY are you?

Help:cry:, this truck is a real pain in the a_ _ !!! After fixing a fuel problem, went to start it and the nose cone on starter broke, replaced the starter and now it will not turn over. I can hear the relay click but have no power to the starter!! Anyone PLEASE help me, I wont to burn this...

I do not know if this will help but the civilan injector pumps are the same just have to change the tops of the pumps. Also the smoke could be head gaskets, easy way to check is take the radiator cap off start the engine and if you get bubbles in the resivor head gaskets are bad. But smoke they...