Search results

Exactly. Remove those two check valves and your issue very well could be resolved.

Remove the check valves from the fuel lines also.

I hate rebuilt starters. They add too many variables. Solenoid, Bendex alignment to flex plate, what parts were replaced and with what... Etc etc. Testing the voltage on your batteries without load isn't really eliminating the problem. Knowing if you're staying north of 22 volts WHILE cranking...

You're lucky. That part is damn near worth it's weight in gold.

That's something govplanet should definitely remove. They pull out a bunch of benign stuff yet leave a hot copper connection capable of electrocuting a random unsuspecting person. This is negligence.

Hello All, Just a reminder to make sure you all replace your tires with old date codes or tires near expiration of the date codes. Plenty of people run our Hmmwvs on tires from the auction which are generally old and dry rotted. Please take the time to replace them. These tires weren't yet...

First purchase is always longer. I won't give you my horror story but call govplanet frequently and stay on top of them. They sent my sf97 and approximately 300 other people's to one guys house in Florida. Can't make this sh*t up. Thankfully he was honest and sent them all back to govplanet and...

Guard Dog fried my starter. I now use a keyed switch which is required to energize the start wire so that the key must be present for the standard ignition switch to work.

IBISTEK is the way I went. I'm happy with it.

@Retiredwarhorses Did both my turrets. Neither of them leak. Now, the top of the hatch, that's another story but that can be addressed. You can keep 95% of water out of your Hmmwv. Also, my 2011 1167 400 amp alternator was chewing through my harness. Luckily @Retiredwarhorses was able to...

My 2011 1167 is a 351XXX

Sounds to me you need to tighten down your battery cables. 1. Do the lights come on now? 2. Can you blow your horn? 3. Do the needles jump when you turn the start switch to the first position?

Man this saved me a ton of time and effort one day.

Very noble. I'm in Cali and tied up but if I was close I'd help.

Great work. Outstanding. Congratulations

Yes 2in body and 2in suspension

.

So... The question is which roof vs the Seco roof. My 1045a2 roof is steel. So that roof is approx 350-400 lbs. The Seco roof is likely 180 to 200 lbs. I could move the Seco roof around my garage myself. The OEM Steel roof I needed help. If you're interested in a turret I see all of the parts...

Welp, let me give you my thoughts on that roof. Seco will tell you that it's mfg from a DOD contractor in Turkey to spec. Outside of the fact that foreign mfgs are not permitted to make parts for our warfighters, to my knowledge, there has never been an OEM hard top on a 4 man truck without a...

My Rear wall Door measurements are as follows: Height: 25 inches Width: 11.5 inches Thickness: 3/4 inch Note: My rear wall doors may not be exact spec.