• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Humvee will not start

BlkH2O-Jarhead

New member
10
9
3
Location
New Mexico
Humvee has new batteries. I started up, drove a bit. Left the lights on 5 minutes with engine off while getting a soda. Tried to start, nothing. No glow plug light. Nothing. Took off new (2 months old) keyed ignition and put on original GI ignition, nothing. Checked batteries, good charge. Checking power I could not detect and power in the 3 wires going into the starter switch. Any ideas from you smarter guys? How to check neutral switch? Nartron smart box?
 

HoveringHMMWV

Well-known member
Steel Soldiers Supporter
481
1,112
93
Location
AL
What model HMMWV do you have (does it need to be in Neutral)? Explain a little more about “Nothing”. Battery cables clean and tight? Confirm that it does NOT crank?
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,931
9,589
113
Location
Papalote, TX
Humvee has new batteries. I started up, drove a bit. Left the lights on 5 minutes with engine off while getting a soda. Tried to start, nothing. No glow plug light. Nothing. Took off new (2 months old) keyed ignition and put on original GI ignition, nothing. Checked batteries, good charge. Checking power I could not detect and power in the 3 wires going into the starter switch. Any ideas from you smarter guys? How to check neutral switch? Nartron smart box?
Try shorting S and T in the diag port and see if it cranks, ign off.
 

Gamble

Well-known member
405
347
63
Location
Los Angeles, CA
Sounds to me you need to tighten down your battery cables.

1. Do the lights come on now?
2. Can you blow your horn?
3. Do the needles jump when you turn the start switch to the first position?
 

M1165A1

Well-known member
413
859
93
Location
The High Country, CO
Very basic but recheck all battery cables as per the chart in the battery box. Failing that test for power directly under vehicle on starter positive while someone turns ignition to start.
 
Top