• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. G

    Clutch grabs, releases, grabs, releases when engaging. Hydraulic clutch modification?

    Best go ahead and replace the clutch. Flywheel likely will need resurfacing at that time. Hydraulic clutch won't help your difficulty.
  2. G

    Split Ring Horror??

    Lock ring wheels are quite safe if proper procedures are followed. They are made to be soldier proof.
  3. G

    Master Cylinder Bad?

    I got my brake assembly lubricant from Euromotor Electric.
  4. G

    Master Cylinder Bad?

    Check to be sure the tiny hole toward the rear of the master cylinder is not blocked. May have to use a bent wire to check.
  5. G

    Resolved: Added 100amp pedestal box to MEP-803, gfci issue

    I have had problems with gfci units made in China. New ones bad out of the box also.
  6. G

    Bleeding brake cylinders on M151A1

    Those steel ball bleeders are rare nowadays I think.
  7. G

    303M HydraMatic rebuild

    A great write up and fascinating information. I just know I don't want to have to use it. Thank you!
  8. G

    New Mexico to East TX Adventure

    Good job. What is "the rest of the story"?
  9. G

    In tank fuel pump substitute for M35

    Pull the pump out of the tank. Sometimes screens clog, rivets get loose, connecter hose rots, probably other things I don't know about.
  10. G

    303M HydraMatic rebuild

    Looking forward to progress reports.
  11. G

    In tank fuel pump substitute for M35

    Of course one could clean the fuel tank every 10 or 20 years. Some of those pumps can be resurrected.
  12. G

    Finally bought a M37!

    I would try to fix the original tank. It's a pain to fit something else and have the filler neck and fuel gauge work out.
  13. G

    Finally bought a M37!

    I would try it. It's a bypass filter, not much pressure. If you are a worrier, give it a skim coat of slow setting JB Weld.
  14. G

    M37 engine rebuild initial start with oil leak

    A job well done in the end. Good write up.
  15. G

    Purchasing my first Deuce

    I echo the above posts. Make very sure the brakes are good. Also check the parking brake function. Allow plenty of stopping distance when driving. They are good trucks, just have some age on them, like lots of us.
  16. G

    Questions about my m54 5 ton.

    Your clutch may be just stuck from rust. I advise selling the truck and buying something better suited for your purposes.
  17. G

    M35a2 engine

    Jeepsinker has youtube videos about his 6bt engine swap. The man has good skills. See "tactical repair " on youtube.
  18. G

    Re-painting New Wheels That Already Have a Factory Finish

    There is stuff sold where auto body shop supplies are sold for surface prep. The previous suggestions should work fine.
  19. G

    VFD M35A2c returning to Texas Forest Service

    The M35 didn't go to auction. It got transferred to the Berclair VFD. They picked it up this afternoon. Cranked up immediately and after warming up, it left in a puff of soot and a whine of turbo. Went down the road in good for. They got a good truck.
  20. G

    VFD M35A2c returning to Texas Forest Service

    That is one of the reasons the M35 is going away. I think it drives just fine, just sluggish due to the weight of fire fighting equipment.
111,175members
165,488threads
2,328,762posts
851online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks