10 bolt wheels

[redneckracerx]

I'm in the market for5-ton super single wheels to run 16.00-20 michelins. I came across a set of 7. They are the 2 piece 10 bolt style. My first question is will they work with this size tire? Second, is the price good?

 

[jwaller]

yes they will work just fine. thats the combo I have. you didnt mention what the price is but anything around 200/wheel is normal. if you need tires I have many 1600's I need to sell.

 

[redneckracerx]

OH, he said 1200 for the set. So I guess the price is good?

 

[sermis]

If only you were comming to Texas. I have some nice HEMET rins. Even some mounted 16.00's on Hemets.

 

[M1075]

I'm in the market for5-ton super single wheels to run 16.00-20 michelins. I came across a set of 7. They are the 2 piece 10 bolt style. My first question is will they work with this size tire? Second, is the price good?

Ideally, you want 2 piece rims from the M939 series 5 tons (A1 or A2 models). FMTV and HEMTT rims can work, but are not the best choice. For the ones you are looking at, how many bolts hold the rim together, 10, 12, 16 or 20?

 

[guner51]

RE: Re: 10 bolt wheels

you guys are talking about two piece rims, so does anybody got the nuts for these that hold them together?
I got 10 rims but don't have any nuts.

 

[Cdub]

RE: Re: 10 bolt wheels

Hi,
Are you mounting these wheels on a M809 or M939 series five ton....??

seya,

C'dub

 

[jwaller]

RE: Re: 10 bolt wheels

seco in augusta, ga has the nuts. I just had to buy some. they are the real deal part but they are about $10/nut. you could use grade 8 from the hardware store for about $1 each.

 

[dma251]

all they are is a 3/4" flanged frame nut with a black oxide coating on it. They really are nothing special.

What's special is the darn valve stems - they are tricky to find and rediculously expensive if you do.

 

[Cdub]

What's special is the darn valve stems - they are tricky to find and rediculously expensive if you do.

I had to replace the valve stem on my spare and Yes, it cost me big $$$......

Each of the four combat wheels I dismounted the tire from did have the bead lockers inside them.

seya,

C'dub

 

[steelsoldiers]

Yep, I broke a valve stem on one of mine when I was installing the CTIS valve! Argh. I got one from Winslow. There is a company that sells the OE ones. I found it by Google'ing the P/N. I think 1075 found a supplier too. They aren't cheap anywhere though.

 

[M1075]

You can get the OEM valve stems for about $21. I have the contact information if anyone needs it.