• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

10 ton 6x6 M125 differential brake handle??

WhoMe08721

Active member
191
123
43
Location
Bayville/NJ
Hey guys,

Can some one tell me what the differential brake handle dose in a 10 ton 6x6 M125 and how it works???

Thanks
-Chris


Capture.JPG
 

deuceman51

Member
885
10
18
Location
Scotland South Dakota
Locks one side or the other of the rear brakes to allow tighter turning. Similar to how tractors have 2 brake petals for turning in muddy conditions. I've used one before on an M123 and it definitely can make it turn a little tighter.
 

Karl kostman

Well-known member
Steel Soldiers Supporter
2,308
893
113
Location
Fargo ND
Or if you pulling/hauling something very heavy in the rear it can give you a very short term way to steer the truck if the front end is very light!
KK
 

fasttruck

Well-known member
1,265
633
113
Location
Mesa, AZ
It is also a poor man's posi traction. I remember push it forward and it locks the left rear brakes, back is right. The applicable -10 manual describes its use. More if get one side in mud and spinning: brake it until the other side pulls. Not especially designed for
steering like some farm tractors.
 

fasttruck

Well-known member
1,265
633
113
Location
Mesa, AZ
The relevant TM is 9-2320-206-10 Section 2,paragraph 2-6 and it does state that the differential brake can be used to assist in turning the vehicle.
 
Top