• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

100 amp vs 200 amp generator?

emmado22

Moderator
Super Moderator
Steel Soldiers Supporter
7,058
148
63
Location
Mid Hudson Valley NY
Is there any advantage of running a 200 amp genny vs the old school 100 amp? I read something that the 200 amp doesnt go thru the glow plug box? it's a base model bone stock M998. No add ons.
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,937
9,599
113
Location
Papalote, TX
The old school is a 60 A single voltage with brushes and a rather poor regulator subject to failure the 200A and the 100A are dual voltage usually which helps keep the batteries balanced and they are a brushless design.
The 100A is much rarer than the 200A and generally more expensive.
 

NDT

Well-known member
Steel Soldiers Supporter
10,461
6,535
113
Location
Camp Wood/LC, TX
I say no advantage to the 200A. The “old school” 100A doesn’t go through the start box on mine.
 

Milcommoguy

Well-known member
Supporting Vendor
1,710
2,265
113
Location
Rosamond, CA
I say no advantage to the 200A. The “old school” 100A doesn’t go through the start box on mine.
RIGHT... The contacts on the ENGINE connector to the box can not handle the current. The 8 ga pins are only rated 70 amps on a good day.

Was a bad design right out of the gate...errr BOX, CAMO
 
Top