Jsampo85
New member
- 18
- 0
- 1
- Location
- Fall River/MaA
Good morning Gents, i have come across and issue with a few fault and warning codes that i can't find in the 10 and 24P manuals for these new 10K's
WARNING-427: CAN DataLink Degraded "communication between ECM and another device on the Sae J1939 datalink has been lost"
ACTIVE FAULT- 781: CAN DataLink Failed "Sae J.1939 Data Link 2 Engine network-abnormal update required"
WARNING- 2545: KeySwitch Reset Required "Unable to establish communication with engine"
If anyone that's familiar with these codes help me out i would really appreciate it a lot!! These are preventing the Genset from starting and i cannot find what the codes mean in the TM's
-Josh Sampson
WARNING-427: CAN DataLink Degraded "communication between ECM and another device on the Sae J1939 datalink has been lost"
ACTIVE FAULT- 781: CAN DataLink Failed "Sae J.1939 Data Link 2 Engine network-abnormal update required"
WARNING- 2545: KeySwitch Reset Required "Unable to establish communication with engine"
If anyone that's familiar with these codes help me out i would really appreciate it a lot!! These are preventing the Genset from starting and i cannot find what the codes mean in the TM's
-Josh Sampson