10KW SF-10-MD and MEP-018A differences

[cranetruck]

Questions; what are the differences, do they use the same regulator? They are both 10KW gensets, is it just a matter of age/upgrade? I have the manuals for the SF unit and would like to know if they apply to the MEP too.

Thanks,

 

[Recovry4x4]

Same difference Bjorn. I have one of the changes to the paper manuals that indicate to cross out SF-10-MD and put MEP-018A. From what I understand there are 3 different regulators used on the genset. One is an open frame and that is reportedly the repairable one. The genset in question has one of these. I also have a different design that hasn't been tested. Thats yours too. Also, the open frame regulators are the same on 3, 5 and 10KW sets.

 

[cranetruck]

Appreciate the info, thanks!

 

[Recovry4x4]

They are convertible to LP too via a kit!!

 

[cranetruck]

They are convertible to LP too via a kit!!

Anybody know where to find one of these kits? Part number?

Thanks.

 

[Recovry4x4]

Try here Bjorn
http://www.propane-generators.com/military-surplus-generators.htm

This link is broken.

 

[cranetruck]

Thanks Kenny.

 

[mangus580]

Bjorn, have a setup for propane for these....