Derrickl112
Well-known member
- 2,654
- 84
- 63
- Location
- Southeast MI
.
Last edited:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
.
- Thread starter Derrickl112
- Start date
SCSG-G4
PSVB 3003
- 5,370
- 3,383
- 113
- Location
- Lexington, South Carolina
Could you please specify exactly which truck this happened on. It may be obvious to you, but we in the peanut gallery like things spelled out so we can form possible answers.
- 3,871
- 497
- 83
- Location
- Gray Court SC
I would think its on his fmtv but I guess I could be wrong.
SCSG-G4
PSVB 3003
- 5,370
- 3,383
- 113
- Location
- Lexington, South Carolina
I think so too, but I know nothing about them. But... someone who only reads what he put in the text might have a hard time figuring that out and skip the thread, when they have the answer he is looking for.
Derrickl112
Well-known member
- 2,654
- 84
- 63
- Location
- Southeast MI
.
Last edited:
- 2,811
- 41
- 38
- Location
- Mt. Eden, KY
Sounds like a chaffed power lead/wire. Look at the wire bundles routed over frame work/ edged body panels. I have found several chaffed wires on my trucks. Lots of vibration in these vehicles. First time it shorts, the breaker pops, second time it shorts, it welds itself to the ground element.
Derrickl112
Well-known member
- 2,654
- 84
- 63
- Location
- Southeast MI
.
Last edited:
Derrickl112
Well-known member
- 2,654
- 84
- 63
- Location
- Southeast MI
.
Last edited:
Derrickl112
Well-known member
- 2,654
- 84
- 63
- Location
- Southeast MI
.
Last edited:
- 4,810
- 742
- 113
- Location
- Liberty Hill, SC
I think the issue is not very many of us here have any fmtv experience. Even guys who may have driven or do drive them in active duty, don't work on them beyond basics. I wish I had an answer for you. One more reason I stick to the old trucks. A lot less for me to figure out when things go wrong.
If you changed the module but the fuse keeps blowing, then I agree with scar and look for a chaffed wire somewhere in that circuit. Are there other components fed by that fuse besides the PDP? Maybe a sensor or something? Could try unplugging things one at a time and see if it still blows. But I personally would check all connections and wire in that circuit first.
If you changed the module but the fuse keeps blowing, then I agree with scar and look for a chaffed wire somewhere in that circuit. Are there other components fed by that fuse besides the PDP? Maybe a sensor or something? Could try unplugging things one at a time and see if it still blows. But I personally would check all connections and wire in that circuit first.
Last edited:
Derrickl112
Well-known member
- 2,654
- 84
- 63
- Location
- Southeast MI
.
Last edited: