14.00 x 24 tires for M123 10 ton

[Andy1234]

Mods, if this is inappropriate, please delete it.

I'm in need of some 24" NDCC tires for my M123. Size is 14.00 x 24, anybody know where they can be found? I'm looking for at least 6, more if the price is right.

Also willing to consider the later 24" Michelin tires that came on the M911.

Also, I need (5) wheels for an M123.

Preferably, all these will be in the Midwest, close to StL. But, if they're not, I can arrange shipping via truck freight.

Thanks,

Andy

 

[DanMartin]

Good luck on the M123 tires. It's my understanding they have not been produced in years.

Here's a good link: VanNatta Big Trucks - The big 6x6 Mack M123A1C
Look at the section about tires...

I've seen some road grader tires can still be found in that size, but as far as NDCCs, unless Coker tire starts making them, I doubt you'll find any...unless you buy them 10 at a time, still attached to an M123.

 

[AMGeneral]

Another"Good Luck" Andy,I have been looking for tires for mine for 5 years now!!

I have mentioned to several other 10 ton owners that somewhere someone has the molds for these tires,we should pool our cash and order a run of 500 or so.

 

[DanMartin]

Call up Coker tire...they are your only hope. I know they are making NTD and some NDCC tires now....just need to get them to make the big 14x24s.

 

[bbf]

i may be picking up a m123 and parting it out

 

[country]

Andy

the tires are hard to come by in NDT tread. You can find more common patterns more easily

we have a good take out Cummins engine and trans/transfer with radiator- cheap- if you are looking for spares

Dave
www.easternsurplus.net

 

[entrepreneuroh]

Hello All,

I have built a 1/6 scale R/C model of the Dragon Wagon and I am looking for some help to get the data I need to replicate the 14.00 x 24 tires including the sidewall lettering and the rims. I am presently using cart tires which do not have the correct military tread or sidewall markings. Can anyone take a set of measurements of the tire and rim as well as provide me a rubbing on paper of the sidewall markings? I am willing to pay someone to do this for me. If anyone has a tire (even one that is damaged and unservicable for actual use on a vehicle) and a rim that I might obtain for taking measurements to recreat in 1/6 scale I would be very appreciative. I live in Painesville, Ohio 44077 just east of Cleveland. I regret not taking the opportunity to get the measurements I needed from Henry Vanetta's Dragon Wagon before he passed and his widow sold his collection.

Best Regards

Christian Weiss III
440-221-9973
entrepreneuroh@aol.com

 

[joeM62]

I think there is one guy that runs an ad in the Military Vehicle Magazine one of the tire
guys can't think of his name but should be in there with the rest of the other tire places.

 

[eldgenb]

I have access to a bunch of both, tires are not in good shape but I can get plenty of wheels. Let me know.

 

[ACBMWM#]

These guys may be able to help. I used them a few years ago. I am not sure if they sell by small numbers anymore.
foreigntire

 

[Squirt-Truck]

How many tires do you need?
I have a buddy that has roughly 20 that were 90% or better, I think several were on wheels.
I will contact him and see if he still has them and for how much.

 

[MAJOR]

I saw a post about somebody going to scrap five of the `10-tons , looking to sell of parts , tires whatever, hope this helps---ck page one for the 5-ton and larger forum.