kipman
Active member
- 2,514
- 15
- 38
- Location
- Lancaster Ohio
What model would a 15 kw deisel genset be?, it is enclosed, is 400.00 fair price?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
15kw gen set
- Thread starter kipman
- Start date
- 10,865
- 758
- 113
- Location
- Appomattox, VA
It would be a MEP-004A, 15 KW, 60Hz. $400 is a VERY fair price for one! Retail is around $4000 for the same thing. As long as it works, you're doing well!
kipman
Active member
- 2,514
- 15
- 38
- Location
- Lancaster Ohio
Thank you very much, see you in june.
kipman
Active member
- 2,514
- 15
- 38
- Location
- Lancaster Ohio
Sorry, it is a mep 113a genset.
- 4,640
- 28
- 38
- Location
- Cambridge, Ohio
If it's the MEP-113a, that's the 400 Hz model. Unless you're going to run some air crafts or a boatload of incandescent lighting, or purely resistive loads, I wouldn't give $40 for it.
Just my
Just my
FormerNewMVGuy
Active member
- 1,237
- 10
- 38
- Location
- stockton NJ
rat4spd
New member
- 652
- 10
- 0
- Location
- Evansdale, Iowa
That's why it is "only" $400.
- 4,640
- 28
- 38
- Location
- Cambridge, Ohio
IMHO it's still $360 too muchrat4spd said:
kipman
Active member
- 2,514
- 15
- 38
- Location
- Lancaster Ohio
it does have a knob to adjust down to 60 hrz, I assume that it can not be adjusted?
LanceRobson
Well-known member
- 1,638
- 206
- 63
- Location
- Pinnacle, Stokes County, NC
If the set is in a acoustic suppression kit (ASK), don't go by what the plate on the kit shows. The same kit will go on all three gen set types. You'll need to find the set data plate or do some homework.
Check these links for more info. Hope this helps.
TM-9-6115-464-12 Wrench Impact Hydraulic Model MV-12-140T Manual
TM-9-6115-464-24P Generator Set Diesel Engine Driven Tactical Skid Mounted 15 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Lance
Check these links for more info. Hope this helps.
TM-9-6115-464-12 Wrench Impact Hydraulic Model MV-12-140T Manual
TM-9-6115-464-24P Generator Set Diesel Engine Driven Tactical Skid Mounted 15 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Lance
DaveKamp
New member
- 10
- 0
- 0
- Location
- LeClaire, Iowa
Kip-
If it's 400hz, you have only a few options-
First, is to snag the whole thing, make it function, and then swap out the generator head with a 60hz unit...
or second (as others noted) use it to drive incandescent lamps and resistive loads.
One LAST possibility, is using it to push power into a fairly svelte inverter (like an industrial Variable Frequency Drive, but set to fixed-freq)...
If it's 400hz, you have only a few options-
First, is to snag the whole thing, make it function, and then swap out the generator head with a 60hz unit...
or second (as others noted) use it to drive incandescent lamps and resistive loads.
One LAST possibility, is using it to push power into a fairly svelte inverter (like an industrial Variable Frequency Drive, but set to fixed-freq)...