glcaines
Well-known member
- 3,915
- 2,595
- 113
- Location
- Hiawassee, Georgia
Dave, I can't believe the progress you've made on that truck! You really do great work. It will be great to see the finished product.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
1941 K18-C GMC Recovered today
- Thread starter papabear
- Start date
- 3,804
- 2,838
- 113
- Location
- Peoria, Illinois
The progress is amazin! Thanks for sharin the pics. Gives a sense of accomplishment to us couch potatoes. I know she will be beautiful when she is done, yet the journey gettin there is part of the adventure!
God bless,
Tony
God bless,
Tony
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Ain't it the truth Brother Tony?? We couch potatoes need fellers like Zout to show us what we could do if we knew how...or had the stamina....LOLThe progress is amazin! Thanks for sharin the pics. Gives a sense of accomplishment to us couch potatoes. I know she will be beautiful when she is done, yet the journey gettin there is part of the adventure!
God bless,
Tony
I've learned it's better to let an expert do something than try to do it myself...and then pay an expert to fix my mistakes...and then fix the original problem.
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Some day I am going to hang around someone that know's what their doing - maybe I'll learn something.
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Gatorbill, looks like your AO is about 2 hours away from Louisville, Kentucky. Maybe if we get bored at the MVPA Convention we can make a road trip to your place and see your K-18 and the BC-325 Radio Set??
Maybe I can take you out to lunch or dinner and leave Zout and the boyz at your place to....er..."transfer accountability" of some of your stuff??
Does your truck have the fugly front brush guard??
Maybe I can take you out to lunch or dinner and leave Zout and the boyz at your place to....er..."transfer accountability" of some of your stuff??
Does your truck have the fugly front brush guard??
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Yours will have the brush guard on it just be patient IFS and I already have the dimensions stored away.
Windshield glass just got sent out to get cut so we are not far away on getting the windshield back in it.
Going to attempt to get the back windows roped in tonight - need that second pair of hands on the outside holding onto my glass suction cups - the seal is not once piece - it is split, but eithe way you need that second pair of hands. Once this is done I can finish that back wall and get all those covers in place.
Access holes through the flooring need to be drilled out for the trailer light cord adn both tail lights along with the fuel tank fill pipe - once the harness's are through the holes can be caulked. So out of all that pile I got cleaned up last night those 4 swing door bars can get put on as well.
Sure can't wait till I get my grubby paws on that cab interior - PB took all the seat cushions to get them re-done Saturday so I better make it look good.
Windshield glass just got sent out to get cut so we are not far away on getting the windshield back in it.
Going to attempt to get the back windows roped in tonight - need that second pair of hands on the outside holding onto my glass suction cups - the seal is not once piece - it is split, but eithe way you need that second pair of hands. Once this is done I can finish that back wall and get all those covers in place.
Access holes through the flooring need to be drilled out for the trailer light cord adn both tail lights along with the fuel tank fill pipe - once the harness's are through the holes can be caulked. So out of all that pile I got cleaned up last night those 4 swing door bars can get put on as well.
Sure can't wait till I get my grubby paws on that cab interior - PB took all the seat cushions to get them re-done Saturday so I better make it look good.
wilber
Member
- 149
- 24
- 18
- Location
- olathe kansas
I love the truck and I'm amazed by your patience. Good job.
- 7,744
- 154
- 63
- Location
- Columbus Georgia
I will have more patience now - now that this is done - now I have to find something else to bitch about when it rains.
Got little done on the truck - screens blasted off and painted and installed and them brace shelf thingies on the doors. Got the glass for the windshield back today - started working on the frame when I saw one of the squirrels driving the bobcat.
Got little done on the truck - screens blasted off and painted and installed and them brace shelf thingies on the doors. Got the glass for the windshield back today - started working on the frame when I saw one of the squirrels driving the bobcat.
- 7,744
- 154
- 63
- Location
- Columbus Georgia
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
OK...so does this mean I don't need to bring the backhoe/bobcat/D-4 up?? And besides...where did the pup that looks sorta like BabyBear come from? HUH??
PLUS... I would get some grass planted FAST or you may have more issues that before.
But...back on track....thanks for the outstanding work on the K-18...maybe we can eventually figure out what those brace thingys on the doors are for!
PLUS... I would get some grass planted FAST or you may have more issues that before.
But...back on track....thanks for the outstanding work on the K-18...maybe we can eventually figure out what those brace thingys on the doors are for!
Wallyboy
New member
- 11
- 0
- 0
- Location
- Santa Clara, Ca.
Pretty sure the braces on the door were for hanging/storing the metal step. I think I have a photo somewhere showing the step hanging on the door.
- 7,744
- 154
- 63
- Location
- Columbus Georgia
That makes sense - there are holes on each end all the way through each brace like a locking pin would slide into them at either height.
That's a lot better than what my stupid idea was - but it was soo stupid I only told a couple folks so I do not feel so bad unless they go blah blah it on here
I brought the windshield frame into work to center punch them hinge piviot holes where I had to cut off the screws - besides get it into a real vise to pull those broken off braces from the ends. I am going to drill a couple 1/8th in holes just to relieve the pressure off them. Brought the new braces with me.
That's a lot better than what my stupid idea was - but it was soo stupid I only told a couple folks so I do not feel so bad unless they go blah blah it on here
I brought the windshield frame into work to center punch them hinge piviot holes where I had to cut off the screws - besides get it into a real vise to pull those broken off braces from the ends. I am going to drill a couple 1/8th in holes just to relieve the pressure off them. Brought the new braces with me
.
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Wallyboy, I would appreciate ANY pics you have of the interior of the K-18 box setup. I haven't been able to find any.
SCSG-G4
PSVB 3003
- 5,370
- 3,383
- 113
- Location
- Lexington, South Carolina
BB has visited the neighborhood more than once, maybe he took a side trip while you were distracted.
- 7,744
- 154
- 63
- Location
- Columbus Georgia
That is the neighbors dog - its a Vizila ??? awesome dog. When he is outside the dog goes MIA over to my house cause I giver her Bud Lite - at least he always knows where she will be.
Got the windshield frame all done here - get glass in it tonight and the seal and center bar. That will make a huge visual impact on the truck. Gotta throw down some grass seed tonight as well after driving around with the tractor and a pallet cleaning up that area.
Got the windshield frame all done here - get glass in it tonight and the seal and center bar. That will make a huge visual impact on the truck. Gotta throw down some grass seed tonight as well after driving around with the tractor and a pallet cleaning up that area.
Wallyboy
New member
- 11
- 0
- 0
- Location
- Santa Clara, Ca.
Papabear
There is a article page 12 at: http://www.gtcpoci.info/2013-04_GMC_Times_web.pdf
about Walter Heinigers K-18. In one of the small photos you can see the steps hanging on the door entrance, and in the article he states that it stores on the door hanging on pins.
Leads me to think that is what the steps for our K-18's looked like.
There is a article page 12 at: http://www.gtcpoci.info/2013-04_GMC_Times_web.pdf
about Walter Heinigers K-18. In one of the small photos you can see the steps hanging on the door entrance, and in the article he states that it stores on the door hanging on pins.
Leads me to think that is what the steps for our K-18's looked like.
- 7,744
- 154
- 63
- Location
- Columbus Georgia
When PB comes up next time - I am hiding my steps for the M909 (cause there is enough there to make two of them.
With the rocker panels by the two swing doors rotted out there sure were no signs of holes - but those swing door braces surely have holed in them - how they mount stored is another story.
With the rocker panels by the two swing doors rotted out there sure were no signs of holes - but those swing door braces surely have holed in them - how they mount stored is another story.
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Anyone forget the motorcycle I had to repair at the same time all this was going on - well here is where I am at with that.
Pics of the K because that overrules any two wheeler. SURPRISE PB
Pics of the K because that overrules any two wheeler. SURPRISE PB
- 3,923
- 76
- 48
- Location
- Comfort, Texas
Nice work on that windshield my friend. You know, it looks like a beaver lying under the K-18 
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Outstanding job on the windshield Bro!! Also the star on the door is EXACTLY what I was looking for...but just didn't know it.