USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
Can you PM me details on them, etc.? Everything is tied up in my other truck at the moment, but I can plan ahead on yours if it works for me to buy them from you in the future.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
1952 M135 W/O Winch (USMC 00-08s other truck)
- Thread starter USMC 00-08
- Start date
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
- 3,912
- 2,723
- 83
- Location
- Edmonton, Canada
I really like those videos.....It's like we're there! If you could only see my stupid grin when you throttled up and she responded like a snapping turtle. Lucky truck!
- 250
- 29
- 28
- Location
- Salmon, Idaho
Love the video, what a great sound, your a magician.
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
Thanks guys. I hope to finish up my other truck this summer and then start on this truck. Time for me to learn about these transmissions now.
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
Great now I want to fix mine or at least 1 of them.
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
I think you should. If you have never driven one, they are a different animal. I'm probably 6'3" tall and these are by far the most comfortable trucks for me to fit in.
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
Well I'm 6'4" so I can use all the room I can get.
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
Then you know what I am talking about. My knees hit the steering wheel when shifting an M35, M54, M813,etc. I just sit back and enjoy the ride in the G749 series.
I'm not sure why the military designed most of their vehicles for short guys.
I'm not sure why the military designed most of their vehicles for short guys.
yodraino
Member
- 30
- -1
- 6
- Location
- ellensburg
I found that the rear main seal is the usual culprit when the starter is full oil if you take the plug out of the flywheel cover that helps. good luck I just pull the engine to change the rear main seal in mine so far so good.
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
Neat! Can you post pictures of replacing that seal? Sounds like I am going to need to do it in the near future.
yodraino
Member
- 30
- -1
- 6
- Location
- ellensburg
I took a look but I didn't take any pictures of that step of the project I did follow the directions to a T and talk with a 82 yr old engine builder that's still has his machine shop he had some good tips.