- 3,911
- 2,719
- 83
- Location
- Edmonton, Canada
It's one type of seal for our windows. You can take our glass class on Tuesday for a hamburger today right here. https://www.steelsoldiers.com/threads/how-to-rust-proof-reseal-window-frames.80294/
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
1952 M135 W/Winch
- Thread starter USMC 00-08
- Start date
It's one type of seal for our windows. You can take our glass class on Tuesday for a hamburger today right here. https://www.steelsoldiers.com/threads/how-to-rust-proof-reseal-window-frames.80294/
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
Things are turning green again.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
- 250
- 29
- 28
- Location
- Salmon, Idaho
Looking good, I can smell the fresh paint from here.
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
We installed the fuel tank last night. There is still some touch up to do on the connections and the fuel pump shield needs installed after that.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
It all sure looks pretty.
The mounting "tape" must be a specialty item, where did you get that?
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
It is just rubber strap I ordered off Amazon that is the same width and thickness as the old deteriorated cotton stuff that was on it. I used weatherstrip adhesive to fasten it in place before I installed the tank. Hopefully the adhesive is strong enough.
- 3,911
- 2,719
- 83
- Location
- Edmonton, Canada
It's kinda funny when ya think a 45 gallon drum is 11 gallons short of fillin' that tank.
Are you going to drive that museum piece in the mud or build a back up truck we can get dirty? Once this is done you'll be bored.
Are you going to drive that museum piece in the mud or build a back up truck we can get dirty? Once this is done you'll be bored.
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
It will probably be a road queen unless I have to get it dirty. I'm ready to get this done and enjoy some "boring" regular preventative maintenance and driving. Don't worry though, I still have one more truck to do and two parts trucks to start pulling apart.
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
This is what the rubber strap replaced.
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
Still painting parts.
- 3,222
- 392
- 83
- Location
- Tonopah, AZ
Looking good!!! When I did my M35A2 I had parts hanging all over. I feel your pain!
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
We are finally seeing some things come together. I dropped the ball on getting The Low/High Range decal for around the speedometer, but will get back on that.
The rear window got a new gasket cut and is installed. The upper drip edge will be installed later.
The fall camo is ready on my other project.
The rear window got a new gasket cut and is installed. The upper drip edge will be installed later.
The fall camo is ready on my other project.
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
I emailed the dash marking pictures from Plowboy to Dave at Delta Team Decals last night. First thing this morning he had this ready and I have ordered a set.
I'll post pictures of them when they arrive. He is calling them the M135 Dash Marking if any of you want to order a set.
I'll post pictures of them when they arrive. He is calling them the M135 Dash Marking if any of you want to order a set.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
- 250
- 29
- 28
- Location
- Salmon, Idaho
One fine looking truck.
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
I got the decals in from Delta Team Decals and finished my instrument cluster. I am very happy with it. If any of you need the Low/High Range decals or stencils, ask Dave for the M135 Dash Markings.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
- 3,911
- 2,719
- 83
- Location
- Edmonton, Canada
Let's take your truck on the left.....it's got more gas in it then the other one. Cool website over at Delta so if they're going to be fast and reasonable to deal with, they should get a plug. http://www.deltateamdecals.com/ I'm going a little nuts wanting pictures of it going back together so I know you're sniffing the finish line like a Bloodhound. ......let's hook up the batteries!
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
I did get new batteries a couple weeks ago and started the truck last weekend after almost 2 years of it sitting there. It started right up and ran great. I expected a little bit of a fight after sitting so long but there was none.
The M923 windshield seals work great. Get them into place and cut the few inches of excess off the top.
1/4 inch round weather strip was glued in above the windshield hinge.
The passenger side windshield is installed. Will work on the driver side later.
The M923 windshield seals work great. Get them into place and cut the few inches of excess off the top.
1/4 inch round weather strip was glued in above the windshield hinge.
The passenger side windshield is installed. Will work on the driver side later.