Dieselholic92
New member
- 24
- 0
- 1
- Location
- Lynd, Minnesota
Trying to get one of the 2.5 tons going. The truck is a 1952 Reo M35, with a Reo 331 Gold Comet straight six. It has the water fording kit on the motor. I can't seem to get any spark out of it. I've tried a few different coils, I made sure there is power to everything, I cleaned up all of the contacts on the distributor cap and rotor, and I've checked out the spark plugs and they are fine. I thought maybe it could've been the engine ground strap, but I took that off, cleaned the contact areas, and mounting surfaces, but it didn't change anything. The points were replaced 4 years ago or so, and I don't know what else it could be other than the points?