• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

1952 REO M41

N

Northern Mike

Member
8
33
13
Location
North Bay ON
Hey guys never posted or used a forum before so forgive me if I screw this up lol. I recently acquired a reo m41 cargo truck but not finding much in the way of info. Apparently it’s a somewhat rare truck. I have seen the truck on here before from the previous owner. It has the continental 6602 in it which runs fairly decently but needs some ignition work. I’m looking to see what’s out there as far info on how this truck was originally built and how it actually should be setup because I’d like to restore it as original as possible but make it a decent driver as well. It currently has dual 11.00r20 on it but I’ve heard it should have super singles. About the only mod I’m thinking is an engine swap possibly due to parts availability and drive ability. Trying to decide which direction to go. I have a dt466 as well as an awesome running 3208 Cat. Just looking for input on the old girl and other people’s thoughts. From some of the other posts I’ve seen on this particular truck other members maybe relieved it’s going to be left mostly original. I’ll get more pics when I’m around home.
 

Attachments

G744

G744

Well-known member
Steel Soldiers Supporter
1,715
3,845
113
Location
Hidden Valley, Az
Indeed, that is a rare 5-ton. It was originally designed to run 14.00-20 Non-directional tires on 10" wheels with a different offset. The rear hubs were flipped to put the lugbolt flange out.

The 6602 is a great engine, had higher horsepower (234) than any of the later Diesels or multifuels.

The down side is about 4 MPG, but then again my M54A1 only gets 7 to 7.5 depending on the air temp.
 
N

Northern Mike

Member
8
33
13
Location
North Bay ON
G744 said:
Indeed, that is a rare 5-ton. It was originally designed to run 14.00-20 Non-directional tires on 10" wheels with a different offset. The rear hubs were flipped to put the lugbolt flange out.

The 6602 is a great engine, had higher horsepower (234) than any of the later Diesels or multifuels.

The down side is about 4 MPG, but then again my M54A1 only gets 7 to 7.5 depending on the air temp.
Click to expand...
So if I read that right this thing should be on 14.00 singles then? I have a set of 16.00r20 singles that came with it and have been debating on using those. I have 5 rims and four tires
 
Mullaney

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,716
19,766
113
Location
Charlotte NC
Northern Mike said:
This one is international.
Click to expand...
.
Interesting.

I thought REO had that "body shape" and that those trucks made like that were only built by REO or Diamond (hence the Diamond Reo naming at one point in time. Yeah, I know there was a war and that anybody who could build something reliably and read a blueprint was recruited...

I don't see the word "International" on that data plate. But I'm definitely not an expert.
 
NDT

NDT

Well-known member
Steel Soldiers Supporter
10,458
6,530
113
Location
Camp Wood/LC, TX
Mullaney said:
.
Interesting.

I thought REO had that "body shape" and that those trucks made like that were only built by REO or Diamond (hence the Diamond Reo naming at one point in time. Yeah, I know there was a war and that anybody who could build something reliably and read a blueprint was recruited...

I don't see the word "International" on that data plate. But I'm definitely not an expert.
Click to expand...
“I H Co” is International Harvester. Back then, Diamond T was not yet merged with Reo Motors.
 
N

Northern Mike

Member
8
33
13
Location
North Bay ON
Mullaney said:
.
Interesting.

I thought REO had that "body shape" and that those trucks made like that were only built by REO or Diamond (hence the Diamond Reo naming at one point in time. Yeah, I know there was a war and that anybody who could build something reliably and read a blueprint was recruited...

I don't see the word "International" on that data plate. But I'm definitely not an expert.
Click to expand...
I’m not 100% but I was assuming the I.h.co stood for international harvester co. It would make sense if it was a reo because that’s what’s the ownership says but the truck doesn’t say reo or diamond T any wear on it. I double checked and all the numbers match the paperwork as well so I’m not sure
 
cattlerepairman

cattlerepairman

Well-known member
Steel Soldiers Supporter
3,256
3,354
113
Location
NORTH (Canada)
Wild that we obtain a 72 year old vehicle and set out on getting it running and "back into service" for another life of adventure! We sure have set the bar high for the trucks we "play" with. So many other vehicles get scrapped and crushed after one single, measly life!
 
NDT

NDT

Well-known member
Steel Soldiers Supporter
10,458
6,530
113
Location
Camp Wood/LC, TX
Northern Mike said:
I’m not 100% but I was assuming the I.h.co stood for international harvester co. It would make sense if it was a reo because that’s what’s the ownership says but the truck doesn’t say reo or diamond T any wear on it. I double checked and all the numbers match the paperwork as well so I’m not sure
Click to expand...
Reo never made military 5 ton trucks. Just IH and Diamond T at first, then Kaiser Jeep later on in the 1960s.
 
G

GopherHill

Well-known member
474
1,250
93
Location
Thomaston, TX
G744 said:
Indeed, that is a rare 5-ton. It was originally designed to run 14.00-20 Non-directional tires on 10" wheels with a different offset. The rear hubs were flipped to put the lugbolt flange out.

The 6602 is a great engine, had higher horsepower (234) than any of the later Diesels or multifuels.

The down side is about 4 MPG, but then again my M54A1 only gets 7 to 7.5 depending on the air temp.
Click to expand...
I certainly hope the 6602 engine will retained. They are great truck engines in my opinion. Even just idle they have impressive torque.
 
You must log in or register to reply here.
110,897members
165,315threads
2,326,243posts
1,685online users
Top