• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

1953 xm211 resurection

Tatertot51804

New member
26
0
0
Location
Marietta Sc
I recently acquired a 1953 xm211. It was found last year in the woods by developers who were clearing land for a subdivision. it was parked with 7 or so other random trucks. They were all headed for scrap until my friend bought them all. It sat at his house for about a year until i finally bit the bullet and bought it. We are guessing it has been sitting between 20 and 30 years. Most of the over haul tags are from 1964 and 1967. Luckily it still rolls and only the cab has some severe rot. But the frame and bed are still good. The motor was seized from sitting but i pulled the head and sent it off for a rebuild and managed to get the engine unstuck and turning over. Im going to be in it far more than its worth but there is a certain satisfaction from saving something like this and i have no plans to get rid of it.


Where she sat the past year or so
QNo11LN.jpg

Severe passenger side rot
KNATmEs.jpg

Interior full of leaves and dirt
20180131_162800.jpg

Tire didnt like being moved
20180203_132647.jpg

The easy way to load one of these on a trailer
20180203_133140.jpg

20180203_133451.jpg

20180203_133510.jpg

little duct tape should fix that right?
20180203_134722.jpg

Loaded up and ready to head home
20180203_135530.jpg

4 hours later shes home
20180203_154550.jpg


20180203_154608.jpg

Bed full of compost and scrap metal
20180204_140330.jpg

My less that desireable work space to do all this work
20180204_154342.jpg

No more compost and a solid bed
20180204_154351.jpg

Little to no rust under the truck
20180205_163851.jpg


20180205_163942.jpg


20180205_163949.jpg

Cylinder head off. Lots of rust stuff sitting loose on the tops of the pistons but it all vacuumed out
20180204_181230.jpg


20180204_181222.jpg

got the windshield frame freed up
20180205_153510.jpg
 
Last edited:

gentrysgarage

Active member
553
118
43
Location
Lost Angels, CA
I have to finish my M135 first...but once its done, I know of where another one is at that I will be buying for the frame for the G-7123 COE that is in my avatar and it has a well used CA desert body that might help you out if you are in no rush as Mine has to run and drive before I pick it up! Might be a long awhile but an option for you.......
 

Tatertot51804

New member
26
0
0
Location
Marietta Sc
I have to finish my M135 first...but once its done, I know of where another one is at that I will be buying for the frame for the G-7123 COE that is in my avatar and it has a well used CA desert body that might help you out if you are in no rush as Mine has to run and drive before I pick it up! Might be a long awhile but an option for you.......
Ive been buying parts from a guy in nebraska that is parting one out on ebay. So far ive bough the doors, gauges, and headlight assemblies from him. currently waiting to get a shipping quote on the passenger side of the cab. But im sure i will need more and more parts as time goes on
 

SturmTyger380

Active member
482
30
28
Location
Easley SC
Yesterday Tatertot and I had a good visit. Turns out we live about 5 miles from each other. I looked at this truck when it was for sale and passed. He is on the right path fixing this one up!

We visited my place where he got to see my parts trucks.

I know I will be helping him out with parts but the hoarder in me saying ‘what are you thinking’, but you can’t keep this stuff forever.
 

m1010plowboy

Well-known member
Steel Soldiers Supporter
3,908
2,712
83
Location
Edmonton, Canada
Do we have a launch date? You're moving along fast so really looking forward to hearing her run. It's good to see you're surrounded by some of the best G749 company a guy could find. Sturmy knows where to find parts!

Historical research on her movements from the 50's would have been nice to have and if I come across anything else I'll post it here.

There were a couple of trucks that were close although it's difficult to tell if the numbers are authentic to some trucks. One right here on page 22 with 95678.... https://www.steelsoldiers.com/showthread.php?58040-The-unofficial-g749-picture-thread/page22

One historical shot here of what looks like an M135 with Inchon fire dept. 94547 2/3 down this page. http://www.vintagemilitarytrucks.com/No64_6x6_1952_GMC_XM211.htm

Some of the other folks might be able to tell us if the 411 number series were consecutively numbered and sent overseas or how that Inchon era was numbered. It does lead to a possibility that some of the Korean albums might have a picture of your truck in it.

We can all chip into this thread and get more historical data locked down. https://www.steelsoldiers.com/showthread.php?134364-G749-VIN-amp-Military-Registration-Database

Thanks for the update and keep the pics coming.
 

Tatertot51804

New member
26
0
0
Location
Marietta Sc
Yesterday Tatertot and I had a good visit. Turns out we live about 5 miles from each other. I looked at this truck when it was for sale and passed. He is on the right path fixing this one up!

We visited my place where he got to see my parts trucks.

I know I will be helping him out with parts but the hoarder in me saying ‘what are you thinking’, but you can’t keep this stuff forever.
I never thought I'd meet someone on this site that lived so close. Thank you for having me over to check stuff out. Hopefully we can work something out on some parts!
 

Tatertot51804

New member
26
0
0
Location
Marietta Sc
Do we have a launch date? You're moving along fast so really looking forward to hearing her run. It's good to see you're surrounded by some of the best G749 company a guy could find. Sturmy knows where to find parts!

Historical research on her movements from the 50's would have been nice to have and if I come across anything else I'll post it here.

There were a couple of trucks that were close although it's difficult to tell if the numbers are authentic to some trucks. One right here on page 22 with 95678.... https://www.steelsoldiers.com/showthread.php?58040-The-unofficial-g749-picture-thread/page22

One historical shot here of what looks like an M135 with Inchon fire dept. 94547 2/3 down this page. http://www.vintagemilitarytrucks.com/No64_6x6_1952_GMC_XM211.htm

Some of the other folks might be able to tell us if the 411 number series were consecutively numbered and sent overseas or how that Inchon era was numbered. It does lead to a possibility that some of the Korean albums might have a picture of your truck in it.

We can all chip into this thread and get more historical data locked down. https://www.steelsoldiers.com/showthread.php?134364-G749-VIN-amp-Military-Registration-Database

Thanks for the update and keep the pics coming.
Finish date will be a few months. I currently don't work and stay afloat with side jobs. Used my taxes to buy this truck lol. Hoping to get a few things done in the next couple weeks so I can get the oil and coolant lines remade and pick the head back up from the machine shop. I put the oil pan back on the other day so the bottom end is ready to go. I hope!
 

m1010plowboy

Well-known member
Steel Soldiers Supporter
3,908
2,712
83
Location
Edmonton, Canada
So much of the work on them is just labor, taking them apart, cleaning and reassembling. Seeing another one get some attention makes me think I like cleaning them up as much as I like owning a clean one.
Time off and good weather is a unique combination so enjoy that time and keep the progress pics coming.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks