bonesfixed
New member
- 7
- 0
- 0
- Location
- Lawrence KS
Is there anyway to replace the pintle hitch on a m1102 trailer with a a 2 inch ball type hitch?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
2 inch ball conversion m1102 trailer
- Thread starter bonesfixed
- Start date
- 1,702
- 400
- 83
- Location
- Leavenworth, KS
Probably cheaper, easier, and safer to just get a pintle or pintle/ball combo hitch for your tow vehicle.
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
I bought both from Reese direct & they had a great offer of free shipping along with reduced prices. If you have no other trailers, the pintle only is 16K rating, complete for slightly over a Benjamin. The combo with a 2" ball is 30 bills extra. Both units will work perfectly for what you need on the M1102. Its height is the only problem for most people! Look into it.
ke5eua
Well-known member
- 2,568
- 41
- 48
- Location
- Baton Rouge (Central), LA
Here is the parts for the hydro brake setup. http://www.crofttrailer.com/hydro-act-brake-actuator-parts/?sort=featured&page=1
You can get the ball for it for between 150 to 250.
I second on just getting a pintle receiver. You gain articulation and safety with the pintle vs the ball.
You can get the ball for it for between 150 to 250.
I second on just getting a pintle receiver. You gain articulation and safety with the pintle vs the ball.
Last edited:
John Galt
Member
- 205
- 0
- 16
- Location
- Fort Worth, TX
I agree with others and prefer a pintle to ball set up.
One way to convert with an A-dapter kit
http://www.crofttrailer.com/h3la3ir-croft-ring-to-coupler-adapter/#page=page-1
One way to convert with an A-dapter kit
http://www.crofttrailer.com/h3la3ir-croft-ring-to-coupler-adapter/#page=page-1