citizensoldier
Active member
- 3,981
- 17
- 38
- Location
- Northern Michigan. Smelt City
Anybody from the north interested in bringing a deuce T case back with them? I can have it hauled to the rally but it would need a ride north. Speddmon you have room?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
2010 GA Rally Buy/Sell/Trade Thread
- Thread starter Speddmon
- Start date
- Status
- 34,012
- 1,810
- 113
- Location
- GA Mountains
Captain, need 4 HMMWV radials. Send me a PM and lets see what we can work out!
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,134
- 113
- Location
- Athens, Ga.
OK folks, listen up.
The last 2 years, we have struggled with what to do with the field. Do we organize it into areas or do we leave it as a "free for all" where everyone just grabs the spot they want?
The MKT pretty much has to stay where it is due to it's water and electrical requirements and since SCSG-G4 and Wreckerman893 put so much work into feeding us (which keeps them away from the fun of trailrides & socializing) we graciously allow them to keep their vehicles, camping gear and such right near the MKT. Wreckerman usually brings some stuff to sell and since it's impossible for him to be in two places at once, we let him keep his stuff near the MKT as well.
So a few weeks ago, I sent an email to about a dozen of the people whose opinions I greatly value and asked them their opinion. Of course, about half the responses said "yes, you have to have a separate vendor area" and about half said "just leave it as is and if a vendor wants a primo spot, they can show up early and take it".
After going out to D-town last week for the trail ride recon with Squirt Truck and Dumpster and spending an hour in the field, discussing various layouts and options, this is what we are going to try. Keep in mind nothing is in concrete-if this doesn't work or it doesn't work to our expectations, we will try something else next year.
The MKT, Wreckerman and SCSG-G4's area will remain the same. The upper corner of the field. This is also where we will put up any command tents. Next to this area will be a vendor area. We picked this area because it is the flattest part of the field and because of it's proximity to the MKT. Vendors will benefit from foot traffic patterns, hopefully getting the maximum exposure for their stuff.
The rest of the field will remain about the same as last year. The campfire will be center stage and everyone's camping/parking spots will be all around and behind the campfire. We are going to try and leave an entry/exit route through the camping area but it won't be marked, so please use common sense.
We are going to try and have someone on location at all times from Wednesday morning on so that new arrivals will know where to go, but please understand it is difficult to have a (unpaid volunteer) manager on hand at all times. If you are asked to move, please realize it's not that someone is being an arse, but simply trying to keep the field clean and organized.
Squirt Truck took the time to put together a map of the field for us-it may be a good idea to print it out and bring it with you to assist in finding a spot in the field. See the .pdf attachment below. It's 2 pages. Upper map and lower map. Upper map will show you where our field is, which will be helpful to first time rally goers. 2nd (bottom) map is our field.
Finally- I know some of you are asking "what constitutes a vendor? Do I HAVE to go into the vendor area or can I keep my stuff with my truck?"
If you are a guy who has a few items that you bring that you need to sell, you can do either one-the camping area or the vendor area.
If you have a giant display, with tents, multiple tables, etc., you should grab an spot in the vendor area. There is no limit on the size of the area you can take in the vendor area. If we get to the point in the future where we run out of vendor area, we'll start setting spot sizes, but that's years away.
Now-those are the easy ones. You folks that fall in between........ you bring a fair amount of stuff but you aren't sure whether you should be in the vendor area or if you can stay in the general camping area...... I am hesitant to put a limit on the amount of items you can sell from the camping area..... so I am going to leave it to your best judgement. My recommendation would be 10-15 items and less is ok for the camping area, anything more is probably a vendor area thing.
Also, the following should be noted:
You can camp and keep your vehicle in the vendor area if desired. Or you can park/camp in the camping area and set your stuff up in the vendor area. Totally your call.
As always, no fees for vendors, other than what everyone pays (trailride fees, camping fees, etc.).
Please leave the path going through the camping area open and large enough for BIG trucks and trailers. A 5 ton and an equipment trailers needs a fair amount of room. The field we have is HUGE, much bigger than I think anyone realizes.
Also, if you guys are still interested in having an "M109 row" it will be at the very bottom of the field. I kind of need to know if there is still interest in this, as the site manager will need to keep it open for M109/M185 models as participants arrive.
EDIT: Map now uploaded as a .pdf, thanks to SS member mckeeranger for the assistance.
The last 2 years, we have struggled with what to do with the field. Do we organize it into areas or do we leave it as a "free for all" where everyone just grabs the spot they want?
The MKT pretty much has to stay where it is due to it's water and electrical requirements and since SCSG-G4 and Wreckerman893 put so much work into feeding us (which keeps them away from the fun of trailrides & socializing) we graciously allow them to keep their vehicles, camping gear and such right near the MKT. Wreckerman usually brings some stuff to sell and since it's impossible for him to be in two places at once, we let him keep his stuff near the MKT as well.
So a few weeks ago, I sent an email to about a dozen of the people whose opinions I greatly value and asked them their opinion. Of course, about half the responses said "yes, you have to have a separate vendor area" and about half said "just leave it as is and if a vendor wants a primo spot, they can show up early and take it".
After going out to D-town last week for the trail ride recon with Squirt Truck and Dumpster and spending an hour in the field, discussing various layouts and options, this is what we are going to try. Keep in mind nothing is in concrete-if this doesn't work or it doesn't work to our expectations, we will try something else next year.
The MKT, Wreckerman and SCSG-G4's area will remain the same. The upper corner of the field. This is also where we will put up any command tents. Next to this area will be a vendor area. We picked this area because it is the flattest part of the field and because of it's proximity to the MKT. Vendors will benefit from foot traffic patterns, hopefully getting the maximum exposure for their stuff.
The rest of the field will remain about the same as last year. The campfire will be center stage and everyone's camping/parking spots will be all around and behind the campfire. We are going to try and leave an entry/exit route through the camping area but it won't be marked, so please use common sense.
We are going to try and have someone on location at all times from Wednesday morning on so that new arrivals will know where to go, but please understand it is difficult to have a (unpaid volunteer) manager on hand at all times. If you are asked to move, please realize it's not that someone is being an arse, but simply trying to keep the field clean and organized.
Squirt Truck took the time to put together a map of the field for us-it may be a good idea to print it out and bring it with you to assist in finding a spot in the field. See the .pdf attachment below. It's 2 pages. Upper map and lower map. Upper map will show you where our field is, which will be helpful to first time rally goers. 2nd (bottom) map is our field.
Finally- I know some of you are asking "what constitutes a vendor? Do I HAVE to go into the vendor area or can I keep my stuff with my truck?"
If you are a guy who has a few items that you bring that you need to sell, you can do either one-the camping area or the vendor area.
If you have a giant display, with tents, multiple tables, etc., you should grab an spot in the vendor area. There is no limit on the size of the area you can take in the vendor area. If we get to the point in the future where we run out of vendor area, we'll start setting spot sizes, but that's years away.
Now-those are the easy ones. You folks that fall in between........ you bring a fair amount of stuff but you aren't sure whether you should be in the vendor area or if you can stay in the general camping area...... I am hesitant to put a limit on the amount of items you can sell from the camping area..... so I am going to leave it to your best judgement. My recommendation would be 10-15 items and less is ok for the camping area, anything more is probably a vendor area thing.
Also, the following should be noted:
You can camp and keep your vehicle in the vendor area if desired. Or you can park/camp in the camping area and set your stuff up in the vendor area. Totally your call.
As always, no fees for vendors, other than what everyone pays (trailride fees, camping fees, etc.).
Please leave the path going through the camping area open and large enough for BIG trucks and trailers. A 5 ton and an equipment trailers needs a fair amount of room. The field we have is HUGE, much bigger than I think anyone realizes.
Also, if you guys are still interested in having an "M109 row" it will be at the very bottom of the field. I kind of need to know if there is still interest in this, as the site manager will need to keep it open for M109/M185 models as participants arrive.
EDIT: Map now uploaded as a .pdf, thanks to SS member mckeeranger for the assistance.
Last edited:
Streamline
Active member
- 544
- 107
- 43
- Location
- Comer, Ga.
Are you saying you have the Pioneer tool Rack? If so I would be interested if the price is right.i have a tool set off a humvee , no tools .. if anyone would be interested
- 4,640
- 28
- 38
- Location
- Cambridge, Ohio
Lane,
I posted earlier in the GA Rally thread I would bring it back for ya. I'll get it back to Ohio come h*ll or high water!!!!!
Monica
New member
- 112
- 2
- 0
- Location
- Kennesaw, GA
I have a ladder for... something, not sure what. Would someone be willing to trade out to an M109 ladder?
The ladder I have is the same height as the 109, wider stance, and the hooks are bent broad, like it's supposed to go over the back end of a drop-gate. M35 perhaps?
I'll try to get photos of what I've got, but the camera is in hiding right now.
The ladder I have is the same height as the 109, wider stance, and the hooks are bent broad, like it's supposed to go over the back end of a drop-gate. M35 perhaps?
I'll try to get photos of what I've got, but the camera is in hiding right now.
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Clinto - I know some were planning on an 109 row from what I last heard with backing into a flatbed and using that as a deck = have not heard any changes to that.
But that would be nice.
I plan on being there WED sometime in the am and can help in what you need done.
But that would be nice.
I plan on being there WED sometime in the am and can help in what you need done.
Jimma
Active member
- 1,281
- 3
- 38
- Location
- Hartwell, GA
Still looking for a spring seat for the M35A2 also I now need one rear tail light assembly for the deuce. I have the lense but I need a working tail light assembly and casing. I broke mine. Does anyone have one for a reasonable price?
- 4,640
- 28
- 38
- Location
- Cambridge, Ohio
I am really in need of a door hinge. Mine broke not long ago and it even sheered off the bolt going through the hinge...I have to be careful with the door or it will go flopping around.
phil2968
Active member
- 2,591
- 18
- 38
- Location
- Lakeland, Florida
Last I heard Ferro could not bring the trailer. Maybe he can comfirm this or not. Either way I think it would be cool to have the M109 row since we are now staying in ours. The wife did not want to spend the money for the NICE cabin we had last year so I am letting Papabear have it. Jeez I'm a nice guy
!Clinto, that sounds like a great Idea!
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Jimma- I will pack up my pair of take off's as I have LED lights - bring a couple beers over to the truck and get your lights.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Let me look, I am pretty sure I have a NOS one.
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]"){kind=icon}
Jimma
Active member
- 1,281
- 3
- 38
- Location
- Hartwell, GA
Thanks Zout!!!! I sent you a pm.
docfarmall
New member
- 1,947
- 26
- 0
Stickin my thumb out now
vinny-socom1
New member
- 1,360
- 4
- 0
- Location
- Ocala, Florida
anybody have the bottom u-bolt spring plates for a 5ton?(front axle)
Vinny
Vinny
- 34,012
- 1,810
- 113
- Location
- GA Mountains
Folks, I posted up a variety of items I have. With the exception of the scanners in transit cases, if you didn't ask for it, I'm not bringing it. The last thing I want to do is sit around peddling my wares when I can be out blazing a trail. With that said, here is what I remember that I'm bringing and for who;
SECM Trailer- Docfarmall
2 M116A3 trailers - Popacom
4 12 bolt HMMWV rims - Popacom
4 HMMWV Tires - Popacom
Swing side of towbar - Doghead
Lunette side of towbar - hndrsonj
2 amber marker lights - 73M819
2 air shift levers - 73M819
2 power switches - 73M819
Piggyback Device - Ferro
Intake Horn - Gimpyrobb
Double Towbar Adapters - Gimpyrobb
Door hinge part 109 - Phil2968
Help me out folks!
SECM Trailer- Docfarmall
2 M116A3 trailers - Popacom
4 12 bolt HMMWV rims - Popacom
4 HMMWV Tires - Popacom
Swing side of towbar - Doghead
Lunette side of towbar - hndrsonj
2 amber marker lights - 73M819
2 air shift levers - 73M819
2 power switches - 73M819
Piggyback Device - Ferro
Intake Horn - Gimpyrobb
Double Towbar Adapters - Gimpyrobb
Door hinge part 109 - Phil2968
Help me out folks!
Last edited:
- 4,037
- 119
- 63
- Location
- Ponchatoula LA
anyone have a lunette ring for the small jeep trailers. one reasonable??
phil2968
Active member
- 2,591
- 18
- 38
- Location
- Lakeland, Florida
Kenny, how about a door closer/stop for the right side (big) door on a M109. With mounting bolts if you have em'.
- 34,012
- 1,810
- 113
- Location
- GA Mountains
Can't picture that in my head. If it's out there and I can get it off, I'll bring it!
docfarmall
New member
- 1,947
- 26
- 0
good thing i dont need to bring anything cept couple hoses and look about 2 radiators i cant carry any more than that to the rally
- Status