2010 GA Rally Buy/Sell/Trade Thread

[RAYZER]

what happend to buy - sell - trade ?

 

[73m819]

Guess who porked the puppy on accomadations!!!
Yep....me.
Seems like there is ABSOLUTELY NOTHING available....Go figure...there's still over 3 weeks left!!!!!!!!!
Well...the CAMO Crew only needs a place to shower etc., but it seems that is no longer available.

We plan to arrive Thursday afternoon and leave Sunday morning. If anyone with a cabin etc. has to cancel, please PM me and I will pay in advance.
Just need a place for the women to clean up really.
I thought I made reservations back in July...and told the CAMO Members I did...and I did...for the Guntruck Gathering in PA!!!

It's all so confusing I tell ya!!!!!!!!

PB ---YOU are confussed, I think this is the Wrong thread, I think you went the 2010 GA RALLY TTHREAD, not the GA rally BUY/SEll/TRADE THREAD

 

[ctmustang]

what happend to buy - sell - trade ?

OK RAYZER- and now back to our regularly scheduled program already in progress!!!!!

 

[jkelly66]

The first year Mike set us up with a Dixie Chopper to do the grass, somehow or another, we never really cut that much if any.

Them Dixie choppers are fun toys.

But back to the thread, anyone going to be bringing some really nice 9x20s?

 

[papabear]

PB ---YOU are confussed, I think this is the Wrong thread, I think you went the 2010 GA RALLY TTHREAD, not the GA rally BUY/SEll/TRADE THREAD

Thanks Ron...and sorry guys...

Those who know me understand...those who don't...are lucky

 

[ctmustang]

Them Dixie choppers are fun toys.

But back to the thread, anyone going to be bringing some really nice 9x20s?

on the 900x20's

 

[CARNAC]

I should bring some shovels and pitch forks. I'll probably sell out in an hour.

I have a brand new 1100 ndt off rim. Only have 1 though.

 

[gimpyrobb]

Any vises this year?

 

[wreckerman893]

Any vises this year?

Same as I had last year......strong drink....loose women.....ohhh..... never mind.....I thought you meant vices.

 

[Jimma]

Does anyone need a set of deuce bows? I think also I have enough for a 5 ton. If interested pm me and I can bring them to the rally. Also does anyone have a spring seat to sell. I need one and would even give you my box seat......Also anyone have a bargain out there on a m105 trailer. I might be interested in picking up another one.

 

[CARNAC]

Any vises this year?

Not sure yet. I know I have two but I think they are still in MD in storage. If by chance I have them here (and can find them), I'll bring them.

 

[Recovry4x4]

Seen a couple of requests for spring seats. I may have one of the HEMTT looking spring seats available. I think they come in -A3 trucks. They normally need a 3" riser which I don't have. I'm just not decided on using this or a normal spring seat. Have a box seat I can bring if anyone wants one.

 

[CARNAC]

If anyone has a pair of military binoculars, pm me with condition and price. Would prefer the M19s but beggars can't be choosers.

I am also selling grounding rods for generators. Got approx 20 of them. How much is copper scrap price?

 

[tbanks]

copper

Hey Carnac the ground rods are probably copper coated steel like civilian ones.If it were copper only you wouldnt be able to drive them they would bend or mushroom out.Still it is a good item and anyone with a genset needs to be using one.

 

[Green_gator]

Carnac,
I am interested in the 11 x 20. Upgrading the 109 to all 11s this winter and can always use an extra or two.

 

[Speddmon]

I am also selling grounding rods for generators. Got approx 20 of them. How much is copper scrap price?

depends on what you want for the ground rods I might want one of them...maybe more if the price is right.

 

[pctrans]

OK, here goes. Will bring most of the small stuff, but only big stuff if somebody wants it.
Deuce Parts:
Air-assist steering unit for deuce (used but complete AND works) $600.
Air tanks; Battery boxes; Battery box step; battery hold-down frames; bumper;engine side panels; exhuast J-pipe and tailpipe; turbo flex-pipe; primary fuel cannister; heater kit; tire chains; oak boards (under cargo bed); park brake handle w/cable; operator manuals w/pouches; radiator; front shocks; 9.00-20 tires; hood; transfer case; transmission; mud flaps; plus many others too many to list.

5-Ton parts:
Axles (steer/standard/locker); fan shroud; tie-down eyes; air cleaner assy; airpack; air tanks; alternator; antifreeze reservoir; battery boxes and steps; speedo/tach cables; clutch/pressure plate; driveshafts (front/10"/middle/rear); fan blade; fenders; fuel filter cannister; fuel tank; grills; hood; ignition control boxes; injector pump; muffler; power steering box; gearbox; rear bumperettes; engine side panels; starter; steering column and shaft; diamondplate tank covers; fenders; transfer case; transmission; 11.00-20 NDT tires on rims.

Misc Parts:
Arctic canvas softop; cargo trailer brake handles; NOS Cargo cover kits (deuce/5 ton); defroster vent deflectors; doors; fiberglas staves; flasher units (new/used); signal light assy's; used Jerry can mounts; lug nut tool sets; M36A2 Cargo cover kit; metal bow corners; pedal rubbers; clutch/brake pedals; axes/picks/shovels; cargo bed safety straps; slave plug kit; lots of soft top metal bows (new); 1 set wood troop seats; M105 sides/bows/cover (sand); M817 Dump troop seats; vinyl end flaps w/rope, green; 900 series mirrors/frames.

If you didn't see something or want a price, email me. Also have stuff listed in the classified section. pandctrans@gmail.com

 

[AMGeneral]

Ferro is bringing his bushhog Wednesday morning.

I thought Adam sold his tractor months ago?

Plus,GA requires a trailer tag number for your overwidth permit,(I already have mine in the works).

 

[TaylorTradingCo]

I have too much stuff to think about listing and don't plan on setting up to sell like I did last year. I want to ride! I do have some stuff that may be of interest to someone though. I recently bought an expando van trailer that was packed full of tools and testing equipment.
There are tons of various electrical testing gadgets, convertors... I think there is even something to rebuild alternators or something like that. There is also a hydraulic testing kit? More pipe threading kits than I would ever have imagined seeing.
I don't even know what most of that stuff is, but if you do and you have a specific need for an item, let me know and I will see if I have one and we can talk about it.

 

[vinny-socom1]

OK, here goes. Will bring most of the small stuff, but only big stuff if somebody wants it.
Deuce Parts:
Air-assist steering unit for deuce (used but complete AND works) $600.
Air tanks; Battery boxes; Battery box step; battery hold-down frames; bumper; exhuast J-pipe and tailpipe; turbo flex-pipe; primary fuel cannister; heater kit; tire chains; oak boards (under cargo bed); park brake handle w/cable; operator manuals w/pouches; radiator; front shocks; 9.00-20 tires; hood; transfer case; transmission; mud flaps; plus many others too many to list.

5-Ton parts:
Axles (steer/standard/locker); fan shroud; tie-down eyes; air cleaner assy; airpack; air tanks; alternator; antifreeze reservoir; battery boxes and steps; bumper; speedo/tach cables; clutch/pressure plate; driveshafts (front/10"/middle/rear); fan blade; fenders; fuel filter cannister; fuel tank; grills; hood; ignition control boxes; injector pump; muffler; power steering box; gearbox; rear bumperettes; engine side panels; starter; steering column and shaft; diamondplate tank covers; fenders; transfer case; transmission; 11.00-20 NDT tires on rims.

Misc Parts:
Arctic canvas softop; cargo trailer brake handles; NOS Cargo cover kits (deuce/5 ton); defroster vent deflectors; doors; fiberglas staves; flasher units (new/used); signal light assy's; used Jerry can mounts; lug nut tool sets; M36A2 Cargo cover kit; metal bow corners; pedal rubbers; clutch/brake pedals; axes/picks/shovels; cargo bed safety straps; slave plug kit; lots of soft top metal bows (new); 1 set wood troop seats; M105 sides/bows/cover (sand); M817 Dump troop seats; vinyl end flaps w/rope, green; 900 series mirrors/frames.

If you didn't see something or want a price, email me. Also have stuff listed in the classified section. pandctrans@gmail.com

Pete how much for the 5ton air cleaner assy?

Vinny