2012 Ga Rally parts wanted/for sale/swap thread

[Ferroequinologist]

Really need a 900 series transfer case. the one in the M543 is pretty rusty and thin on top, would like to put a 900 series in and get a little OD.

 

[73m819]

Really need a 900 series transfer case. the one in the M543 is pretty rusty and thin on top, would like to put a 900 series in and get a little OD.

A 900 transfer has the outputs on the opposite side then the older 5ts, also think the flanges are different, check with OPECOM (?), he did the switch, ask him what all was involved, I understand, quite a bit

 

[5tonpuller]

I am looking for a set of "drag lights" that they used on the wreckers. PM me please n thanks.

 

[Mthirtyseven]

M37 winch bumper parts

Have left and right front bumper for M37 with winch, also have the frame extensions. Good shape, make offer.

 

[michigandon]

Ten (10) Titan T-Hawk 9.00x20.00 NDTs, still have plenty of life left in them. They'll be coming off my truck this week in favor of a set of G177s.

$35 will get you one tire, tube, and flap, or $300 for all ten. Probably WON'T bring them all unless I get a commitment to purchase beforehand.

 

[tigger]

I have 3 sets of tire chains. fit 22.5 24.5 and 9 00 20. 1000 20 tires. they are adjustable. quick it install with cam tightining. each bag has 2 chains to go on outside tire. I have 3 bags = 6 chains. Tried them on my m35 and they fit great. paid $300 for them will let the set go for $200. Will get photos when it stops raining. they are brand new never opened! Ill even show you how to install them if you like!

 

[RIDDLE1]

I need an entry ladder for a 923 if anyone has one that work. That is going to be one heck of a climb for the folks riding in the back!

 

[citizensoldier]

Not sure where to put this so if you need to move it please do and I apologize. Is anyone from Michigan going to the GA rally? I am in need of 10 Dodge rims picked up in Ohio near Columbus and hauled to Michigan. Just further North would be nice. PM if you can help

 

[100acre]

Doth anyone have a spare CUCV antennae brush guard they wanna get rid of ? I thanketh thee Ya'll

 

[wilfreeman]

Does anybody have a Fat 50 and a Tall 50 ammo that they can part with? They are for a portable CB project I am working on.

 

[2002ford]

I will bringing parts off a m1009. I am not sure yet as they are for sale locally. I am working on getting a complete set up to put a 4 speed in a cucv. Tranny, pedels,flywheel,steering column and any small things. Let me know if you need something.

 

[Speedzilla]

Anyone have jerry cans?

Edit: I will have a set of nice MRAP wheels wheels for sale there, as well as any 900 series parts you may want! PM me as I won't be bringing stuff that people aren't interested in. Thanks everyone!

 

[rebelqwes87]

I will also be bringing a set of bows and a cover for a M105. Cover is Tan with I think only one hole rubbed in the corner, some of the straps have dry rotted also.
EDIT: I will also be bringing a grille for a deuce and a used muffler for a deuce if anyone is interested.

 

[MDSA]

These are not mine; they belong to an elderly gentleman I spoke with today. He has jeep axles for a '48 Willys - long and short axles. He bought them from JCWhitney. Only the short axle had a part #. - GPA 4234. $40

He also has an OLD voltage regulator. No idea if it works. It is about 8" long, 4" high, and 4" wide. It has 2 connecting bolts on top. There are 3 metal tabs with holes along the base. There are also four feet for attaching it to the vehicle. The only numbers I could find we're on the bottom - RA - 72. $30

Just trying to help

 

[100acre]

hey

I will bringing parts off a m1009. I am not sure yet as they are for sale locally. I am working on getting a complete set up to put a 4 speed in a cucv. Tranny, pedels,flywheel,steering column and any small things. Let me know if you need something.

Do you want to sell the windshield if so how much, and do you have a maintenance manual for sale as well?
What do you want for the flywheel and steering column?
Thanks

 

[Jimma]

I still have a few odds and ends available to bring to the rally if anyone wants to buy, trade or barter. 1 set of Rear steel mud flaps and brackets from a deuce, and several deuce driveshafts. I will see what else I can find.

 

[100acre]

?

 

[100acre]

docfarmall

Doc
Needed items

wool gloves with all the fingers not the shooters mitt liners
poncho's

Chief_919 has lots of both. I seen em in his store please help Tim clean out his store

 

[Junkyard Wars Crusher]

Ok, I am clearing out a bunch of excess stuff. Mostly everything is for deuce. Mostly everything is fair/average/needs work. Mostly everything is dirt cheap. Please save this stuff from the scrapyard.

To avoid cluttering up this thread - if you want something send me an email. Don't reply in this thread. I will reply to you and then mark the item sold here.

I will only bring the items that are wanted. So if you want something speak up or it will be left at home.


SOLD bigugh20 -Deuce exhaust stack (w/ clamp), fair condition, $2
SOLD Gunnermac - Deuce exhaust heat shield, fair condition, $2



SOLD onegmjack - Deuce right (passenger side) front fender, Average condition, clean and straight and blue, $20



SOLD onegmjack - Deuce left (driver side) front fender, poor condition, front section is bent and patched, good for cutting on. $5



SOLD mtnrebel - Old style front turnsignal. Unknown working condition. $5 pair.



SOLD mtnrebel - Old style Rear Brake/Turn signal. Unknown working condition. $5 pair. Small blackout light Unknown working condition. $5

 

[Junkyard Wars Crusher]

Ok, I am clearing out a bunch of excess stuff. Mostly everything is for deuce. Mostly everything is fair/average/needs work. Mostly everything is dirt cheap. Please save this stuff from the scrapyard.

To avoid cluttering up this thread - if you want something, send me an email. Don't reply in this thread. I will reply to you and then mark the item sold here.

I will only bring the items that are wanted. So if you want something, speak up, or it will be left at home.

Map Compartment box $1


Deuce Air cleaner Housing $5


Really nice hood with a really big Dent. This hood was mounted to truck, but not latched to grille. A strong wind lifted it and smacked it into the windshield frame (probably repeatedly). Also has Two tiny little cracks at front lip. Otherwise this hood is perfect. Might be good for a custom project if you are going to cut it up. Hinges not included. $15


SOLD onegmjack - Dash panel (stripped) $2


SOLD - MDSA -Exhaust pipe from deuce N/A engine. Used with horizontal exhaust and muffler. Rusty surface, but no holes. $2


SOLD onegmjack - Transmission to Transfer Case driveshaft $5