• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

2014 Haspin parts/trade/sell/buy thread.

love a cummins

New member
15
0
1
Location
columbus IN
stuff i have and stuff i need. all for m35 a2

My needs and wants are much more than my haves. Wants: hard top for m35. Brake master cylinder . Reece hitch adapter. Diesel transfer pump hand crank or.electric. headlights old.style.or new LED. Set of side boards and bows. I have the tarp but not the bows. I would buy a spare generator alternator if someone had one. Also a starter would be nice. After looking. Everything I have is in poor condition. Probably not worth bringing. I have built a couple hydraulic steering kits for the M35. If someone was interested. I also made some seat brackets to mount better seats in the ole truck.
 

amgRainey

Member
51
0
6
Location
loveland, Oh
My needs and wants are much more than my haves. Wants: hard top for m35. Brake master cylinder . Reece hitch adapter. Diesel transfer pump hand crank or.electric. headlights old.style.or new LED. Set of side boards and bows. I have the tarp but not the bows. I would buy a spare generator alternator if someone had one. Also a starter would be nice. After looking. Everything I have is in poor condition. Probably not worth bringing. I have built a couple hydraulic steering kits for the M35. If someone was interested. I also made some seat brackets to mount better seats in the ole truck.
I have some old style headlights. And possibly have some LED I'll be bringing. Along with many other parts will be posting a parts list soon.
 

tm america

Active member
2,600
24
38
Location
merrillville in
I will have some hitch kits and alt brackets.. show special price of 47 bucks..

My needs and wants are much more than my haves. Wants: hard top for m35. Brake master cylinder . Reece hitch adapter. Diesel transfer pump hand crank or.electric. headlights old.style.or new LED. Set of side boards and bows. I have the tarp but not the bows. I would buy a spare generator alternator if someone had one. Also a starter would be nice. After looking. Everything I have is in poor condition. Probably not worth bringing. I have built a couple hydraulic steering kits for the M35. If someone was interested. I also made some seat brackets to mount better seats in the ole truck.
 
As I have in the past, I will bring my stencil machine to the rally. I will produce custom stencils (with 1” tall letters) on-site at your request.

102_1197 (Custom).jpg102_1198 (Custom).jpg

I use stencil board stock that is 6 ½” x 20”. This will allow up to four lines of text with 22 characters per line. Characters that are available are: Letters A-Z, numbers 0-9, period (.), comma(,) apostrophe(‘), slash (/), dash (-), and ampersand (&). See example below.

grid form example.jpg

I can do the standard stuff such as "TP 50" or "CHECK BATTERIES DAILY", but can also do specialized stencils such as your screenname "SGT. ROCK", or your truck number "D-22". The truck number example is great for identifying your pioneer tool handles, chock blocks, tool boxes, ammo cans, etc. (The TM specifies 1” tall lettering for most of the instructional information on vehicles and equipment – so this is the correct size for restorations)
stencils (Custom).jpg




Here is a blank form to plan your stencil. Print a copy (or two) at home right now. Then go look at your truck(s) and figure out what stencils you need. Fill out the form and bring it to the rally.
Click here for a simple picture version -> grid form blank.jpg

Click here for the MSword version ->
Stencil Matrix Form 22x4.doc


These stencils are cut on industrial oilboard. They are easy to use and reusable. The oil board can be cut with scissors or utility knife. You can hold the stencil to the desired surface, tape them, temporarily affix with spray glue, or use magnets to secure them. Then lightly apply your chosen color of spray paint. Also, I have successfully used paint markers to "fill-in" the letters. (less mess and no overspray). I will bring materials to demonstrate if you would like to see how it is done.


The pricing is very simple and very reasonable:
I will do one line of text for $4 (includes the oilboard) .
For the super size deal, fill up the 4 lines for just $10 !
If you want stencil a whole truck, and require more than one sheet, we can talk discount


You do not need to pm me or reply to this thread. Just click the [thank] tab at the bottom of this post and then find me at the rally.

(Lastly, I shouldn’t have to say this, but . . . I will not do any words or phrases that would generally be considered offensive, or would portray our hobby in a negative light. I know the majority of us are respectful, but there always is a chance for one bad apple. Please keep it proper.)

[thumbzup]
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks