2016 Ga Military Vehicle Rally buy/sell/trade thread

[Csm Davis]

m998

green Doghouse cover with insulation. One side snap intact, one missing buckle, fiberglass slightly cracked in 2 spots. Have some data plates attached. Not perfect but better than no cover. $45
2 man green cargo divider/bulkhead with 2 L mounting brackets $75
2 man green cargo divider/bulkhead with no brackets $60
2 or 4 man bows (same) $20 each- 2 available
hood stop bump pad center $10
hood stop bump by latch $10
6.2L core engine with heads, oil pan, inj pump, front cover, valve covers. No cracks or holes seen $75
Serpentine belt AC mount kit red dot $30
Rear upgraded mwo towing bumper used take off with 5/8 bolts $90
rear body to frame mount bracket $15 each


lmtv/fmtv rim with ctis hardware & hoses $85

2 395-20 XZL less than 30% tread for spare/trailer $40 each
16-20 xzl 95% tread with hole in middle of tread-needs patch and slight curb rash on sidewall. best for spare $75

m923/m925/m927 1100x20 spare tire carrier with davit complete $150
m939 blank gauge panel $30

1 only armour shackle with 1-1/2 pin/keeper $40
3/4 tow bar pins set of 2 new $25
microphone holders $4
1 only ibis tek tow bar foot medium $30

Make offer acceptable

I would like the following if still available
2 or 4 man bows (same) $20 each- 2 available
hood stop bump pad center $10
hood stop bump by latch $10
6.2L core engine with heads, oil pan, inj pump, front cover, valve covers. No cracks or holes seen $75
Serpentine belt AC mount kit red dot $30 thanks bud

Sent from my SM-G900V using Tapatalk

 

[CARNAC]

Here's the mfg website and specs on 2xb.
http://www.drash.com/Products/Shelters/XBSeries/Specifications/DRASH2XBShelter.aspx

 

[MWMULES]

Is anybody bringing some of these Hardigg cases? I'm using the **** out of mine for IT and horse show work and would love to grab another one.

Thanks!

View attachment 648608

I should have a couple that are a little bigger, more like foot locker size. I use them to transport other items so as those items sell the cases become sell-able.

 

[steve6x6x6]

I have these 2 stands that i removed from a new M1061A1 trailer. They are 22" to the center pivot screwed down. looks like 14" to 16" travel. When mounted, pull the D ring and it will swivel up and lock

 

[gringeltaube]

How much for those, Steve?

 

[steve6x6x6]

How much for those, Steve?

$30.00 ea. should be good.

 

[goldneagle]

$30.00 ea. should be good.

If gringeltaube does not take them I will.

 

[gringeltaube]

IF....




(Who would want to miss such opportunity...?)

 

[goldneagle]

IF....




(Who would want to miss such opportunity...?)

I didn't want to step on anyone's toes. Since you asked first....

 

[Welder1]

I will take the injector lines. I will be arriving Thur afternoon. Thanks.

Eddie Cannon

 

[joeM62]

For sale M49-M50 duce transfer case pto have one complete kit for $500 and another pto just to itself $200
A set of duce frame extensions for the front winch $100
I will be bringing this to the rally

 

[Welder1]

Some A2 Deuce part to sell...




Injection pump/HH (pulled from rebuild create engine) - $650

Single piston compressor (pulled from rebuild create engine) - $40

HH to Injector fuel line set - $40

2 new windshield panels - sold

NOS fuel cap - $10

NOS winter grill cover - $40

Soft top frame good condition - $75



If interested. PM me.

I will ill take the injection lines. I will be arriving Thur afternoon. Thanks.



Eddie Cannon

 

[patracy]

So I don't plan on bringing much of anything to sell. But I've been given the green light for a venture of my own. I'm possibly going to bring some "remote hole punchers equip with go-fast buttons". If anyone is interested, I'll bring them, just pay for their "food".

Now, as for stuff I'm looking for:
M114 rear door, front driver's hatch, front armor, engine cover grate, steering linkage.
HMMWV stuff - Airlift bumper setup. Or at least the mounting brackets. And a tire mount.

 

[pctrans]

can someone find it in their heart to give these 3 orphan hemtt rims a forever home??? I'm sure someone out there could use them. Never been mounted, have the nuts and o-rings, $100/ea.

bump !!!

 

[TruckGuy]

I will ill take the injection lines. I will be arriving Thur afternoon. Thanks.



Eddie Cannon

Welder1 - They're yours...

I'll be there Thursday afternoon as well.

 

[profo]

I have these 2 stands that i removed from a new M1061A1 trailer. They are 22" to the center pivot screwed down. looks like 14" to 16" travel. When mounted, pull the D ring and it will swivel up and lock

I'll take at the rally

thanks marty

 

[TaylorTradingCo]

more potential stuff

A few more items thsat could be brought if desired.

$5 mermite inserts
$25 M818 semi to trailer pigtail (NOS)
$25 axle chain sets (new in box)
$40 lockable pistol racks
$50 M105 side rail set
$40 metal transmission containers

 

[pctrans]

And I have the front/back rail sets to complete Derek's side rails - $20
Also have very nice set of troop seats for 5-ton longbed (4 - 10' sections); $100, will only bring up if I have a firm commitment.

 

[gimpyrobb]

R4x4: kipper tool box, air mast, slave plug recepticles
Welder1: kipper tool box
ScsgG4:22 bows
Andyrv6av8r:some bows and go lights
Phil2968: kipper tool kit
amg72: m101 racks and 1008 seat cover

What else have folks asked for that I've forgot?

Kenny, you need more Dymo stickers?

 

[TaylorTradingCo]

Pete, I'll take your M105 front and rear rack for $20.

And I have the front/back rail sets to complete Derek's side rails - $20
Also have very nice set of troop seats for 5-ton longbed (4 - 10' sections); $100, will only bring up if I have a firm commitment.