• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

2025 TX MV Rally Buy/Sell/Trade Thread

m715mike

Well-known member
2,821
3,884
113
Location
Montgomery, Texas
The 2025 Texas MV Rally will be held on March 21-23. Here's a link to the rally thread: https://www.steelsoldiers.com/threads/2025-tx-mv-rally.222553/

Feel free to list items in this thread that you want to buy, sell or trade at our campsite.

As part of the rally, we will attend the Living History event at the Museum of the American G.I. on Saturday, March 22. There will be vendors at the Museum. These vendors rent a space from the Museum and pay fees for the privilege to sell their goods. If you wish to sell items at the Museum, please contact them directly (http://americangimuseum.org/). Otherwise, keep all buy/sell/trade activities at our campsite.


Let's see what you have to buy, sell or trade!
 
  • Like
Reactions: 98G

CARNAC

The Envelope Please.
Supporting Vendor
8,294
694
113
Location
Corpus Christi, TX
I’ll have a few of the pelican toolboxes without tools. Various tools . I’ll bring a few water and fuel cans (scepters). An official folding table for a SICPS tent. I’ll bring a sample of some hard plastic flooring and can deliver more if there’s interest. Bunch of other stuff.

ALeo check my conversation post about the 4.2kw generators off of M577s.
 
Last edited:

m715mike

Well-known member
2,821
3,884
113
Location
Montgomery, Texas
I’ll have a few of the pelican toolboxes without tools. Various tools . I’ll bring a few water and fuel cans (scepters). An official folding table for a SICPS tent. I’ll bring a sample of some hard plastic flooring and can deliver more if there’s interest. Bunch of other stuff.

ALeo check my conversation post about the 4.2kw generators off of M577s.
I’m interested in looking at the toolboxes, tools and bunch of other stuff.
 

kendelrio

Well-known member
Steel Soldiers Supporter
2,750
8,938
113
Location
Alexandria, La
All-
I'm a sucker for militaria and gear, so if you have any white elephants you've been trying to get rid of, odds are I'll buy them.
Prefer to buy with epayments like PayPal, Venmo etc as opposed to cash because I always run out.... 🤦
 

pistolnut

Member
106
11
18
Location
Caldwell, TX
I’ll have a few of the pelican toolboxes without tools. Various tools . I’ll bring a few water and fuel cans (scepters). An official folding table for a SICPS tent. I’ll bring a sample of some hard plastic flooring and can deliver more if there’s interest. Bunch of other stuff.

ALeo check my conversation post about the 4.2kw generators off of M577s.
Do you have any more of the heavy extension cords you had a couple years ago?
 

pistolnut

Member
106
11
18
Location
Caldwell, TX
I have some odds and ends of deuce parts: injection pump core, fenders, side boxes, air shift transfer case, wheels etc. I also have a mostly complete “running when parked” parts deuce.
 

Nitrodiver

Member
93
98
18
Location
Baytown, Texas
IMG_6381.jpegE3C8C645-48B6-4F69-8CE6-81D52CC9CCCC.jpegI I rebuilt this trailer for me to keep. Not what I wanted just what I could find at the time. Now I have what I wanted. So no need for this trailer anymore. Now It just sits. Other than paint it’s a new trailer mechanically. I honestly hate to sell it because it pulls so good. Brought 12k back from Ok. At times I forgot it was back there.

$4250
18’ tandem axle
2 5/16 Bulldog hitch
82 1/2” deck inside rails
2 7000lbs 8 lug Dexter axles
14k GVRW

New items
4 new 16” tires
New elebrakes
New springs and U bolts
2 new spring equalizer
New 2x6 treated deck
Complete new wiring, front to back
All new LED lights
New rear light buckets

The not new
No ramps. I can build any length/width at additional cost.
Jack works fine with 12k on trailer. But a little wobbly and bent back at the mount. I believe it’s a 20K single speed jack.
Could stand to have a paint job.
The drivers side top rail is bent in about an 2”. The bent area is about 6’ from the front. Done by previous owner.

In order to keep the buyers cost down I didn’t fix the not new things. If I fix them cost goes up. I have full fabrication, welding and painting capabilities if buyer wants them fixed or custom work done.

I have about 50-75 13’ 3” long X 3 1/8 wide X 1” thick red oak boards. Not sure what these were made for. But they were made for the military and already painted green. I used them to redo the cargo/seating sides on my Deuce. Worked perfectly looks great. If your doing this type of thing I got you covered. Or you just need some red oak boards.


I have some precision measuring tools as well. Dial calipers Starrett last word, outside mics etc. I can get any of it calibrated as well.

I can bring any of the above for serious buyers. PM me what you’re interested in or for more pics.
 
Top