24 Bolt Wheel and Runflat Question

[Beretta92fs]

I have a set of 24 bolt rims that I am putting together with E range MTRs. There are clearly two versions of the rubber runflats. A one piece that is slightly offset, and a two piece that has the spacer.
Does anybody know which runflat belongs with which wheel and tire combo. I am only concerned with the 24 bolt wheels. I know the 8 bolts ran magnesiums with bias ply and I'm not putting 12 bolts on this project...

Thanks for the help in advance!!!

 

[Retiredwarhorses]

Does not make a diff on the older 2 piece rubber or newer 1 piece rubber....you can mix and match.
the tire be it an MTR, BF Goodrich, Goodyear MT etc makes no diff, nor does the number of bolts on the rim....12 bolt, 24bolt.....

 

[Beretta92fs]

Thank you!!!

 

[jesusgatos]

I'm using HMMWV wheels/tires on this project, and have got four 12-bolt wheels with Goodyear tires that I pulled off M101A3 trailers. Want to pick up a few more wheels/tires though, and was wondering which version of the wheels/runflats I ought to look for.

 

[UNIMOG-GUY]

Depending on your use of the tires and rims you could lighten the weight and run these to allow you to air all the way down and not have to worry about destroying the inside of the tire.

http://www.trailworthyfab.com/Hummer-Wheel-PVC-Insert.html

 

[jesusgatos]

Thanks, I'm aware of those. Might end up going that route, but kinda like the idea of keeping some kind of run-flats in there. Was just wondering if there's a superior version.