sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
What size u join is on the 3053A transmission?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
3053A U joint size
- Thread starter sermis
- Start date
- 3,021
- 222
- 63
- Location
- eldersburg maryland
BIG 4 are # 332 they are the big ones, 4 are # 330 and are the smaller ones.
sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
Is that a spicer number?
I have a chart but can't find them.
http://www2.dana.com/Expert/wc.dll?hvtss~dedsec~2~13~06~
I have a chart but can't find them.
http://www2.dana.com/Expert/wc.dll?hvtss~dedsec~2~13~06~
- 3,021
- 222
- 63
- Location
- eldersburg maryland
precision number, any parts place should be able to cross them. i got mine at parts depot. very expensive.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Od iron has them
sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
Well I am really looking for a converson to go from the deuce to a 1310 if they make one. If I knew the size I would have a place to start.
sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
I found a converson from the 1310 to a 1350 for the rear of my M725 to CCUV axle. Now need to go from the 3053A to the jack shaft and axle which are 1310's.
- 3,021
- 222
- 63
- Location
- eldersburg maryland
so you need to go from a 1332 to a 1310?
sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
On my Dana chart I don't see a 1332 even listed. I need to go from what ever the U joint is on the deuce trans to a 1310.
- 3,021
- 222
- 63
- Location
- eldersburg maryland
well i was just guessing that they put a '1' in front of the joint number to make their number. call paul at national truck parts, 918-660-0310. there is probably a rear drive flange to put on the 3053 to make it work, he will know.
mudguppy
New member
- 1,587
- 15
- 0
- Location
- duncan, sc
i came across this thread because i needed to research the size of the u-joint. thought i'd update with my findings:
the small u-joint is indeed the precision no. 330; Spicer 1410 series, plain journal 1.188"D x 4.188"W. Napa PN: NPJ330
the large u-joint is indeed the precision no. 332; Spicer 1500 series, bearing plate style 1.562"D x 4.562"W. Sermis could not find this joint on the link above because it is a 'BP' style, and the chart was for 'OSR' (Outside Snap Ring) style. Spicer 1500 BP Style
now, what I need is a conversion u-joint that combines these two: Spicer 1410 to 1500BP. they don't make one...
the small u-joint is indeed the precision no. 330; Spicer 1410 series, plain journal 1.188"D x 4.188"W. Napa PN: NPJ330
the large u-joint is indeed the precision no. 332; Spicer 1500 series, bearing plate style 1.562"D x 4.562"W. Sermis could not find this joint on the link above because it is a 'BP' style, and the chart was for 'OSR' (Outside Snap Ring) style. Spicer 1500 BP Style
now, what I need is a conversion u-joint that combines these two: Spicer 1410 to 1500BP. they don't make one...